why is my rb25 slow?

Discuss the RB20, RB25 and RB26 series engines.
240addict87
Posts: 1
Joined: Sun Feb 28, 2010 5:46 pm
Car: 1989 240sx

Post

im new to this forum so i appologise if im not doing this right.i recently did a rb25det s2 swap in my 240 and something isn't right.out of boost,driving is fine but it has a rough idle but there is no misfire.in boost it feels like it just wont go.my sr was faster.it is boosting and getting fuel.it is the factory ecu on 13 lbs.nistune coming soon.i have changed the ecu,maf,plugs,and the whole set of coil packs.but it still is doing the same thing.i know my timing is 2 degrees retarted.i know that could cause the rough idle but what about being so slow under a load? mods.fmic,bovintake,k&n filterfull 3" exhaust walbro255lph fuel pump.

any help would be greatly appriciated.


Joe
Posts: 6511
Joined: Sun Feb 09, 2003 8:29 pm
Location: Phoenix, AZ

Post

fix your timing.

User avatar
SullivanRacing06
Posts: 1974
Joined: Sat Apr 21, 2007 8:45 am
Car: r32 gtst, 06 350z, r32 gtr, rs4 steaga, 04 350z, f350/6bt
Location: Gainesville

Post

timings off or you have a leak in your i/c set up

User avatar
virus77
Posts: 1775
Joined: Thu Mar 25, 2004 9:43 am
Car: 95 S14, 71 240z, 97 e320

Post

check tps


Return to “RB20DET / RB25DET / RB26DETT Forum”