Why doesn't my horn work with my release hub? 56k warning

[w1ngzer0]

Am i missing something? All the electronics are the same except you have to press the preasure tip on the needle. But when you press the horn it doesn't work. do i need to make a needle to press down the needle or what? :-/



that thing in the middle is the needle i have to press to get the horn to go off.

[s13sr20chris]

i am not really familiar with your setup.

if pressing that doohicky makes the horn go off and pressing the horn pad does not, it stands to reason that the doohicky is not tall enough. the horn operates by grounding the horn relay. what that means is the horn wire just wants to tough the chassis somewhere to blow the horn.

[w1ngzer0]

i think the momo spacer i put on the steering wheel has to go. I think thats what lack there of.

Ok, well it wasn't really the fact there was no power getting to the middle. It was the fact there was no ground. I figure there wouldn't need a ground since there was only one wire but there was. So, tomorrow im going to yet agian take my steering wheel apart and see if i could put that spacer in
Modified by w1ngzer0 at 5:16 AM 3/6/2005