Which way to put fuel line in on KADE?

ONLY for ADVANCED technical discussion about the 240sx!
xagna
Posts: 314
Joined: Mon Feb 21, 2005 2:56 pm

Post

I am finishing up my single cam to duel cam KA swap. The engine cranks but it is not firing. So I am thinking I might have put fuel lines incorrectly.

I put the fuel line that comes out of fuel filter into the tube that goes around to go into injector on cylinder #1 and the return fuel line onto the tube that goes into FPR.

Did I do it right or should I switch the lines?


theother1wstolen
Posts: 263
Joined: Mon Jan 15, 2007 5:23 am
Car: 92 240sx Coupe SE

Post

you have it set up correctly, if your certain its a fuel issue i recommend checking your fuel pressure next. then go down the line from there.

xagna
Posts: 314
Joined: Mon Feb 21, 2005 2:56 pm

Post

Thanks for your reply, dude.When I pull fuel lines after ignition try, fuel shoots out of fuel line. Do I still need to check fuel pressure or do you mean to check fuel injector?

slowsr20
Posts: 5
Joined: Thu Feb 15, 2007 7:32 am
Car: 95 240 sr20det

Post

get a buddy to hold the fuel line and try to start the car and see if fuel comes out ? and if it does then it has to be your injectors

User avatar
rogoman
Posts: 848
Joined: Fri Feb 17, 2006 5:44 pm
Car: 1991 240SX FB
2012 Altima 2.5 S

Post

It looks like there is fuel being fed to the injectors. However you may have no ignition or the ignition timing may be incorrect.


Return to “240SX Technical Forum”