Which Head Gasket Sould I Get??need Help!!!!

[9240sx]

I have a s13 redtop,and im doing the head gasket,and im not sure on what one to get.i will have only bolt-ons,stock turbo,and stock intercooler.mods will be intake,exhaust,test pipe,greddy turbo extension.and maybe a few other things.so boost sould not be much higher then stock,and i dont what something to thick,so sould i get the....... -greddy 1.0mmor-apexi 0.8mm

-thanks for the help,-brian

[Dori Dori]

'hurddawg' posted this in another thread...these are headgasket thicknesses and their resulting compression ratios according to Apexi.

Thickness__(0_o)__Compression Ratio 0.8mm___________8.71.1mm___________8.51.5mm___________8.21.8mm___________8.1

So basically, if you want stock c/r, go w/ a 1mm (give or take 1/10mm)

[Onizuka]

Heavythrottle has a 1.1mm headgasket for cheap.

[180fan]

picked up my greddy 1.2mm mhg from project silvia for i think 170?

[9240sx]

i thought i read someone saying the stock head gasket is 0.6mm?is this wrong?if it is how thick is the stock head gasket?-thanks,

[Onizuka]

stock is 1.1mm