Where To Get CUSTOM IntERCOOLER Piping?

[PROJECTRB240SX]

DOES ANYONE KNOW WHERE TO GET PIPING AND MENDRAL BENDS FOR INTERCOOLER PIPING? I AM DESIGNING MY INTAKE SYSTEM NOW AND NEED PIPING FOR IT.

[lok]

I had to go through a company that dealt with diesel trucks. I went with 2 and half 90 degree mandrel bends. Paid 10 dollars a bend. Also if you need silicon hose from a place like that ask for "silicon hose connector for a air to air intercooler" I learned once you start using the right words doors just open up and people are very helpful. I paid around 10 dollars a foot for the silicon hose. Its blue and looks just like any other connectors.

good luck,

[PROJECTRB240SX]

ARE YOU IN HAWAII? AND, THANK YOU.

I MISS GENKI SUSHI!! THAT AN JAN JANS.

WELL SO YOU THINK A DESIL COMPANY SHOULD HAVE IT?

[lok]

Here is a pic of my finished ic piping

I got an s14 ic off of ebay

Here is a pic of the silicon hose



That is b4 we had the ic piping made for the ic

Hope this helps out also look up turbo in the phone book and go through a truck place b/c they are a lot cheaper then stuff specially made for our type of cars.

good luck,

[PROJECTRB240SX]

WELL THERE IS NOTHING SPECIFIC FOR THE RB20 IN A 89 SO THATS WHY I HAVE TO GO CUSTOM.

[lok]

Yeah I know what you mean, but if you look on the net for intercooler silicon connectors they are almost twice as much as I paid for mine and same thing goes for the 90's. But for the diesel trucks you get the same thing for much less.

[PROJECTRB240SX]

THANKS

[ImportIntelligence]

Scroll down, there is a link for the Intercooler piping that we use on these swaps. If you need smaller sections of strait give me a call. we have some 2 3/4 in stock in SS. 610.321.2055

http://www.importintelligence....-Edit

[PROJECTRB240SX]

DO YOU HAVE SPECIAL PRICING FOR NICO MEMBERS? AND DO YOU GUYS HAVE U-BENDS?

[PROJECTRB240SX]

BECAUSE I NEED EITHER 5 U BENDS AND 5 FEET OF STRAIGHT PIPE

OR 9 90 DEGREE BENDS AND 5 FEET OF STRAIGHT PIPE AND AT THOSE PRICES ITS WAY TO EXPENSIVE.

[PROJECTRB240SX]

WHAT ABOUT RUBBER OR SILICONE ELBOWS?