Where to buy terminal ends?

[grnsierra01]

I'm replacing the wire from the 8 pin connector on the passenger side inner fender to the swirl control valve solenoid and I need to know where to buy replacement terminals.

Any ideas?

[Q451990]

to NICO!

For the most part, Nissan sold wiring connectors only as parts of harnesses. If you have a pull-a-part / u-pull-it style salvage yard around, it might be worth your time to wander around looking at other mid to late '90s Nissan products to see if you can find the same connector.

[Desert Rat]

agree....many parts like that interchange between models. I once needed a temp sensor for my Frontier. Found one in a junked Sentra. Same part.

[carldu]

What they said. Try some local junkyards.

[grnsierra01]

I was just hoping to replace the power wire to the swirl control solenoid since I have it out of the harness and just need to crimp terminals on a new wire and plug it back into the harness.

I would guess the harness is the same for 2wd and 4wd, since there doesn't seem to be any 4wd trucks in my local junkyards.