Where do you find vh45de?

[Florida240sx]

No junkyards around here have q45's. So far down south 3 engines that have been pulled have been bad... One's from japan are 1k. Don't really feel like buying a q45 and parting it out...Anyone got some ideas or just keep searching the yards.

[AZhitman]

I paid $600 for my JDM takeout motor.

EMail me for the hook.

[Boosted 70z]

Theres a yard up here in jacksonville that has a complete q45, I don't know the condition of the motor but I'll try and find their number.

[Florida240sx]

I paid $600 for my JDM takeout motor.

EMail me for the hook.

Come with transmission and ecu? Used those bags yet that I sent ya?

[Clifton]

Watch Craigslist and the paper. I found a crashed running complete car for $600. I've seen a few under $1000 complete. JY's around here have them but people pull the injectors and TB's off as soon as they come in.

[Florida240sx]

Can't find any q45's at a good deal. But probably going to buy a car so I get the cluster radiator etc.

[Clifton]

Here's a couple near you (20-30 miles)

http://fortmyers.craigslist.org/pts/370 ... 08446.html

Think this one is same as above$800http://orlando.craigslist.org/car/339459451.html

There was another but it was $1700.

[Florida240sx]

Already seen them thanx though

[T45]

I got my complete unwrecked 92 Q off Ebay for 456.00. Keep lurking.

[pmpmstrb]

I've got one in my garage that I've been trying to get rid of. Shoot me an email at bvoils at indy.net

[boostedbastard]

check car-part.com it gives you the inventory for a **** load of jy's. hope this helps

[Tecni]

I stock both VH's and Vk's

Anyone needing one, let me know... I can also sell individual parts such as rods, pistons, oil pumps, valve covers... etc etc

I post under "Tecni" on g35driver, my350z, orlando forums, dsmtuners, and my ebay name is tiptronik666.

[DeXteR]

i've also been watching ebay. people sell whole q45's for less than you'd pay sr-swap... it's crazy. if you're going to rebuild a vh, you can get a "siezed" or "broken" q45 for super cheap. i think buying a whole car is the way to go... so many usable parts.

and... you didn't see me here...

[tmorgan4]

Tecni...Can you get me an oil pump sprocket? I'm having a hard time getting one from the guys parting out the Qs.

[moss13]

Found mine on craigslist GA. 250.00 minus ecu and throttle body. The guy gave me an FSM and the q45 brakes. He suggested going to a place called Z1 for the z32 trans. Anyways, I'll be looking for a throttle body and ecu.

[gs14racer]

I have a spare throttle body i can sell let me know

[Tecni]

I keep many in stock. VH and Vk. I can also put together a VK with VH internals!

Let me know.

[email protected]

[twoeightythreez]

I have the cluster and the radiator from my 95 Q if you want it. Also have the doors, the seats, the front end, the radio and climate control, etc. I'm keeping the motor, though.

[Florida240sx]

Find my a 94+ vh45de with mafs wiring and ecu. LEt me know how much. Also if you can get me the z32 5spd transmission [email protected] Justin

[DeXteR]

i was thinking the same thing... but elwesso gave me a tip that i'll share with you now:

you want to try to find a 94 or 95 USDM vh45de. obviously the 90-93 vh had the plastic timing guides which are junk. you could get lucky and find one that had the guides replaced, but i think you're better off not taking that risk. you don't want a 96 because they don't have the vvt and it's also when they switched to obd-2. however, if you don't need the vvt and aren't discouraged by obd-2, go for it.

just some helpful information i'd like to pass on.

[DeXteR]

front and rear damage q45 in south carolina. just one bid with no reserve. currently sitting at $100. 3 days left. too far for me to drive.

http://cgi.ebay.com/ebaymotors...&rd=1