Where do i get Front Wheel Bearing Hubs???

The club for Nissan Maxima and Infiniti I30 / I35 owners, and the official home of Maxima Club of America!
NFOCUS
Posts: 6
Joined: Mon Jul 03, 2006 4:45 am
Car: 1990 Nissan Maxima 3.0L V6 Was auto, Now Manual

Post

Hello,

I just wanted to know where is the best place to get new front wheel hubs. I just knowticed mine had some slop in them after 100K.

Jim


User avatar
MinisterofDOOM
Moderator
Posts: 30928
Joined: Wed May 19, 2004 5:51 pm
Car: 1962 Corvair Monza
1961 Corvair Lakewood
1974 Unimog 404
1997 Pathfinder XE
2005 Lincoln LS8
Former:
1995 Q45t
1993 Maxima GXE
1995 Ranger XL 2.3
1984 Coupe DeVille
Location: The middle of nowhere.

Post

Nissan dealer is the best bet. Maybe watch ebay and some online retailers, but I'd stick with OEM Nissan parts for that.

Fezzik
Posts: 944
Joined: Wed Mar 05, 2003 6:24 pm
Car: 2010 G37 Vert w/ stage 1 GTM supercharger

Post

Call 18882546060 and ask for Dave Burnette. He works at South Point NIssan in Texas and i get all my OEM parts from him. Usually a lot cheaper than the dealer.

User avatar
internetautomart
Posts: 61
Joined: Mon Jun 19, 2006 2:21 am
Car: more than you!
currently 94 u13 (electrical gremlin), 97 u13 (incoming)
Contact:

Post

Do you need hubs?or bearings?the hub and bearing are 2 seperate pieces but the bearing is the type that requires a press for installation.

Pauls 98 SE
Posts: 21
Joined: Thu Jul 06, 2006 4:22 am
Car: 1998 Maxima SE - 5 speed Arctic White w/Black Leather and Bose
Contact:

Post

NFOCUS,I have two front wheel hubs with bearings for sale. Can't guarantee how long the bearings will last, but they were good when removed from the car. Removed from a 93 SE. Just taking up space in my garage, I will let them go cheap.

If you want more details, then email [email protected]

Paul

popone913
Posts: 31
Joined: Wed Mar 22, 2006 3:05 pm
Car: 96 Maxima GLE

Post

Buying a new hub is absolusly the easiest thing to do. And do them both at the same time is my recomendation. It's a lengthy process doing the work needed to replace the bearing.


Return to “Maxima Forum & I30 / I35 Forum”