where can i get these lights?

[pj]

hey nico, probably an idiot question but where can i get these?i can get the housings on ebay im pretty sure...but what about the actual lights, ive seen a few different pics of set-ups online. anyone know brands, sites or links to people whove done this?ive searched but i dont think im hitting the right phrasing or somthing, i can find pics but no actual info.flame as much as you want, but i do need some help here

[AZ89two4Tsx]

They are made by Supermade and way too much for your budget. Something crazy like $1K.

A lot of people just buy some fog lights from Autozone or wherever and rig them up. Not the brightest, but they work.

[pj]

s***, yeah supermade is beyond me at the moment money wise...1k? damn!im just trying to find alternatives, and somthing quick for lighting.my car murdered a deer....

[drewce]

LOL suckksss

[pj]

yes, yes it does....he was moving full stride across the road and i was doing high 60's mph...it was instant death and destruction...actually went up and over my entire car. funny but, geez im hating the fix.

[94_240sx]

$475 from Karmotion. Karmotion is basically Raceonusa.

http://www.raceonusa.com/nissa...-p-86

[pj]

yeah i know that, i have the housings covered. just asking about the actual light lamps. im going to try an advanced or autozone or somthing like AZ89two4Tsx was saying.

[ashibah83]

check these guys out, still WAY to expensive but still

http://www.clearcorners.com

[pj]

oh yeah those are pimp, but for 2200 a kit...theyd better do everything i want and stay all night

[Sushibandito]

Not sure what the housing is, but I found this on our local Nissan board. Looks like a good set-up if you can get ahold of stock flip-ups

http://www.northwestnissans.co...00836

[pj]

i'd buy those. too bad he's not local.

[240_dude]

Most people just buy the housing and do the autozone thing as others stated, but u dont even have to buy the kit, my friend bough a silvia hood and some fogs for the headlights and it looks about the same. I thought it was some ricer s*** before lol, but now that i look at it, its just 2 sick.

[Nali]

I dont know where you could find those exact lights.But im guessing any Slim driving lights will work just as well.

http://www.pmlights.com/produc...=1549

http://www.jcwhitney.com/Drivi...9;0;0

http://www.amazon.com/Hella-FF...IH8RU

I could keep on going but im sure you get the idea.Slim driving lights.If you dont feel like ordering online, just visit any offroad specialty store, they always have driving lights in store, just ask for the slim or ultra slim(whichever fits the slot better)

P.S Dont get the fog lights, buy driving lights...foglights as headlights FTL!

[pj]

nali thanks man, s*** i didnt even think about jc whitney...havent bought anything from there since like 1999...awesome thanks man

[pj]

getting a hood off coupey this weekend, probably pick up or order some good lights, so i can get the hatch back on the road asap.i can probably hammer out the housings i have untill i get somthing nice.now if i can get the rad.core support to stop looking like it had a stroke ill be in buisness...nice.

[TroubleBound]

That sucks you hit a deer i see them all the time around here i stop for like 10 per night. My brother lost a coupe to one and a different brother broke his Stealth. What part of Richmond do you live in? Does your car have an SR in it? If so, or if you know how to install one, mine is like 80% in just need some help figuring the last bits of it out. Let me know if you can help some day when you have time or something..Im in Chesterfield/Midlothian area

[pj]

whatsup man, yes deer are trying to kill me and all my cars...i dont live in richmond any more, havent for a long time. i live in the country now...although im pretty sure in about a month maybe two, im moving to midlothian(going to get back into college).this car has ka, it was my drift project when i first got it but ive been through a few vehicles and this ended up being my daily and i dont have time to swap and dont want to go for it until i can do it BIG...yeah, im not one of the cool kids.i'd be happy to help you out anyway i can, whatr you running into trouble with? wiring or ecu stuff? or just wrenching?

[Hooked on 240]

couple months ago i said to my self "Cant believe i havent seen any deer"

The next day i hit a family and sent a fawn into a ditch with our plow truck :rofl That b**** went FLYNG.

[TroubleBound]

Yeah i already modified the harness and plugged in everything i could, but there are probably like 3 or 4 more plugs i don't know where they go, i need to get some pictures but they are in weird places. That and the ignitor chip has like 8 different port's on it and i only know what plugs into one of them:



I think i know where #7 goes, into the ignitor chip plug on the main engine harness, the other 7 i have no clue. Other then that just stuff i need to search i spose like bleeding the clutch and installing the BOV i don't know where all of those ports go either. I can probably do the rest(gauges,grounds,turbo timer, boost controller) if i get enough time with it, i would have much more done to it if i had internet access at the garage so i could look stuff up while i was there. My friends know even less about cars/nissans/sr20's than i do.

[pj]

ok, this should help with the random missing vacuum linesthis covers 1,5,6 now i could be wrong on this but you may not need these anyway

[pj]

also check this outhttp://forums.nicoclub.com/zer...55551im thinking the eai, is like egr...you wont need it to get the car running.the threads about an sr going into a 510 but that doesnt matter, its all crap for factory wastegate and i dont think youll need that ish either...so, disregaurd my picture and check out this thread lol...it'd suck to go through the bs of hooking up crap you wont need.

[pj]

back to the original thread....NALI, i ordered the hellas...and some more crap...but the thought just hit me, do you think it would be possible to wire them up for high and low beam output? or should i just pick up a dinky small light(small and round) to go next to them inside the bezel to act as lowbeams?...im starting to think i wont pass inspection without a high/low function...

[Nali]

back to the original thread....NALI, i ordered the hellas...and some more crap...but the thought just hit me, do you think it would be possible to wire them up for high and low beam output? or should i just pick up a dinky small light(small and round) to go next to them inside the bezel to act as lowbeams?...im starting to think i wont pass inspection without a high/low function...

Well you should have told me before you wanted Low/High beam functionality,the simple solution is to get a Dual bulb Driving/Fog light combo.

The Fog bulb aims slightly lower while the driving light is aimed straight ahead.This can easily give the illusion of Low and Highbeam. And if you set the light up right will work just as well actually.

I recommend the Hella Optilux Duohttp://www.amazon.com/Hella-H7...r=1-1

or the Bluhm Dual:http://www.bluhmenterprises.co...id=78

Both are dual bulb setups with fog and driving lights in one.It can easily be said to be Low and High beam.

So that should solve your inspection problem....assuming you have one.

But if its already too late, then yeah just get some really small lights to fit next to the FF75s and use them as LowBeam

[SLiguykyle]

i got mine with the car >_>

[TroubleBound]

^^ Do you know what kinf of lamps they used/can you find out? Do you have low and high beams?

Thanks for the help pj between the pic and the link i think you've pretty much solved my ignitor chip worries. Sorry for the threadjack

Post some pics of your ride when your done with the lights they will look sweetness.

[pj]

Well you should have told me

yes, yes i know...ill make it work though im sure.

i got mine with the car >_>

lol bastard...

Thanks for the help pj between the pic and the link i think you've pretty much solved my ignitor chip worries. Sorry for the threadjack

Post some pics of your ride when your done with the lights they will look sweetness.

cool, happy to help man.- i'll post some pics up but trust me, shes not too pretty... poor things been torched, hammered, bent, pulled, chained to a tree and cussed at the worst part of it(kinda) is i had to use some regular old hood pins to keep the nice clean straight hood i got from coupey, on. my hoodlatch assembly looks chewed up and spit out.its not too bad, i just hate hood pins. theyre f***ing gaudy.

[brandonDavid]

$475 from Karmotion. Karmotion is basically Raceonusa.

http://www.raceonusa.com/nissa...-p-86

actually, 475 for the cf ones, 285 for the regulars.

http://www.raceonusa.com/nissa...p-121

[pj]

B-Metts, yeah i've found them...personally after really checking them out for a while, im not too impressed with the quality and fitment of the raceoneusa pieces. after having a nice look at supermades' product, its gold and lead man, theyre s*** just doesnt compare.originally i just wanted to know about the bulbs, lights themselves. ive gotten a set of hellaFF75's in the mail today.if it ever stops raining, ill try and wire them up. and im going to use my old flip up housings, probably set them at a good height, tec-screw the f*** out of them and then put the covers on to hide the bolts. and ta-daa, permanent sleepy eye. (both my motors were f***'d anyway)

[pj]

so this is what the car was lookin like after i pulled the hood off and kicked the hell out of the bumper and got it good enough to drive home.

this goes to show how far back the radiator and core support were pushed...and of course the fan ate the shroud...

and this would be after i got to her with the trusty torch, come along and BFH. oh and the ugly a** pins... havent wired lights yet, the popups are just flappin in the wind, i hammered the drivers out to look decent, up close it looks like utter crap tho

[asoomal]

Well you should have told me before you wanted Low/High beam functionality,the simple solution is to get a Dual bulb Driving/Fog light combo.

The Fog bulb aims slightly lower while the driving light is aimed straight ahead.This can easily give the illusion of Low and Highbeam. And if you set the light up right will work just as well actually.

I recommend the Hella Optilux Duohttp://www.amazon.com/Hella-H7...r=1-1

or the Bluhm Dual:http://www.bluhmenterprises.co...id=78

Both are dual bulb setups with fog and driving lights in one.It can easily be said to be Low and High beam.

So that should solve your inspection problem....assuming you have one.

But if its already too late, then yeah just get some really small lights to fit next to the FF75s and use them as LowBeam

The Optilux 20/20 are imo the best fog/driving lamps ever!