wheels for my 720

[mastercat]

heres my ?? im lookin at escalade wheels and the titan wheels i hear the titan wheels have to be modded im only going to lower my truck 4 in the back 3 in front
or maby 3 in the back and 2 in the front are these gonna rub the fenders i dont want them to stick way out and look silly any help is great

[AZhitman]

You're going to need some pretty low profile tires to fit the Titan wheels and keep them anywhere near the original overall diameter.

No "mods" to the wheels are required, but you might be modding the fenders somewhat.

Best bet? Get one and do some test-fitting.

[mastercat]

i was lookin around the net and i read u have to take a router to them for the hubs to fit i dont know i just want some nice wheels

[AZhitman]

Check the hub bore on your current hubs with a caliper - should be easy to look up the TItan wheel hub bore online.

[PEZi]

Just get any wheel from American Racing or similar. The bore for big a** American cars is big enough for these. OR... use wheels that fit the Titan

[808NeSan]

hey pezi are u saying that u dont need to bore out the titan rims for the 720s?

[PEZi]

The Titan, as far as the majority of what I have seen do not need it. The Titan uses large bores... X-terras do not, however.

[chi1iW1LL1]

I'm running the Titan rims. I did have to bore 1/2" out on them. used a router with a 1/2" bit in it. there are a few examples on YouTube. they have 225/45/18's on them and are just slightly larger in diameter. It's lowered 2" front and back with no rubbing, could easily go 3" maybe 4". Actually there is some rubbing on the front while turning. don't notice it in the cab, just saw the wear marks while working.
Yea! my first post. hopefully its helpful!