wheel studs

[willismcbride07]

hey guys had some fitment issues with my motegi touge rims, they dont fit. the offset is wrong but the company says there nothing they can do because the (know for sure they fit!lol) well they dont. so beware! anyways im stuck with them and the company agreed to atleast send me some 20 mm spacers because this is my only option. but ive had a problem finding some wheel studs. some places say to get the nismo set but first there only 60mm long and a stock stud is 44mm+spacer20mm=66mm and the caption say the fit the rear studs for the 95 model and front and rear for 94 down, as you can see does not seem like a good match if the company does not say it will fit my front but why? and what are my options? again i have a 95 model with 20mm spacers any help guys?

[-RJ-]

the studs should be the same for all 240sx

[janda240sx]

I read that twice and I'm still a litlle confused as to whats goin on other than you need longer studs. If you purchased the wheels and the bolt pattern is right for your car then the company has done nothing wrong, they told you the wheels would fit aka bolt pattern, not offset. Its your job to make sure you get the offset that you want.

[jeremy242]

The year of your car is important here. The s14 has different size knurls on the front and the rear. The s13 has the same knurl size front and rear as the s14 rears. I am also getting longer studs for my s13. ARP has one the comes off of a newer camero that will work in the s13 front and rear and s14 rears. The part number is 100-7708. The front knurl of the s14 is larger than the rear of the s14. Hope this helps out.