Wheel specs on 03 M45?

Forum for Infiniti M35 and M45, and Nissan Fuga owners.
Post Reply
User avatar
jEzTeR
Posts: 7645
Joined: Sun Sep 15, 2002 2:34 pm
Car: 07 FX35 - 02 Altima 3.5se - 93 240sx Hatch
Contact:
Contact jEzTeR

Post

I checked the spec sheet in the sticky.

The sheet says that the 03 M45 has 18x71/2jj w 35mm offset.

Will a 18 x 8 45 mm offset work?

Top
User avatar
szh
Posts: 18857
Joined: Tue Jul 23, 2002 12:54 pm
Car: 2018 Tesla Model 3.

Unfortunately, no longer a Nissan or Infiniti, but continuing here at NICO!
Location: San Jose, CA

Post

jEzTeR wrote:I checked the spec sheet in the sticky.

The sheet says that the 03 M45 has 18x71/2jj w 35mm offset.

Will a 18 x 8 45 mm offset work?
Hmmm ... not sure, but I think it may contact suspension components. You might want to contact Tire Rack and see what they say. I believe they have done actual measurements on the car.

Z
Top
User avatar
RED_DET
Vendor
Posts: 6613
Joined: Tue May 13, 2003 5:07 pm
Car: 2004 6 speed G35 Sedan, 2011 G37x, 1992 Nissan Sentra SE-R SR20DET, C7Z06
Location: Louisville, KY
Contact:
Contact RED_DET

Post

A 45mm offset is going to be even more tucked in...will look ugly fo sho. Now if you go with like a 9.5" wheel in the back, 45 might not be to bad. But with 8" wheel, I would go any higher than what you have, 33mm might be the ticket.
Top
Post Reply

Return to “Infiniti M35 and M45 Forum”

Search for Nissan stuff on ebay!

Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2024 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy