wheel spacers for 2004 M45

[Manok]

I'm looking for some hubcentric spacers for the stock wheels to bring them even with the fender. Not sure what size spacer or who even makes them but I'm open for suggestions. Any help would be appreciated.

Thanks

[mrmark]

Try Fred at

http://www.wheeladapters.com

He makes his own spacers and they are all hubcentric. You can probably do a 1" spacer up front and 1 1/2" spacer in the back.

[CakeDaddy]

these are 20mm spacers on a new gen M. They are Project Kics brand. "Hub-centric; no pressing studs, and no risk of wobble. They are made in Japan specifically for Nissan and Honda cars. From Evasive Motorsports"http://www.evasivemotorsports....t.mvc





before -

after-

I think this that "flush" thing that people are so concerned about. good luck my man!


Modified by CakeDaddy at 9:48 PM 6/1/2008

[Grantbo]

Nice look with those spacers. I'd go with the Ichiba Wheel Spacers 20MM. They're less $$ and are built hub centric. Tee Project Kics ones require centering rings at $12 each!

http://www.evasivemotorsports....d.jpg

[auditech10]

The pics of the spacers above are hub centric for the spacer ONLY! That is almost pointless since there is nothing for the wheels to mount on. There are spacers that are truly hub centric inside and out.Cheers

[mrmark]

wheeladapters.com makes their own spacers. They are not only hubcentric to the hub of the car, but also to the wheels themselves. The good thing is they can make the hub flange that goes into the wheel itself any size, depending on if you have stock wheels, or any aftermarket wheel. All spacers are custom made for each customer.

[Manok]

Thanks for the help guys.