Wheel size
Re: Wheel size
all depends how much work you want to put in to your fenders. offset, tire size, camber & how low your going all need to be worked with to make a 11" wheel work on a M.
Re: Wheel size
Understandable. Well the wheels I want are 20x8.5 offset +38 fronts and 20x9.5 offset + 39 but there 5x112 so I'm also gonna put of conversion spacers which is 1 & 1/4 thick. Right now I'm lowered 1.25 all around on espiler awd spec springs from burtman industries. Not sure about camber though
Re: Wheel size
with the info you posted above all 4 wheels will stick out of the fenders.
this is just to give you and idea:
20x8.5 with 245/35 tire should be at 30 to 34 offset
20x10 with 285/30 tire should be at 42 to 44 offset.
This will not rub and will need no camber at all.
A wheel that is 20x10.5 with an offset of 45 will stick out of the fender even with out the tire.
Hope this helps.
this is just to give you and idea:
20x8.5 with 245/35 tire should be at 30 to 34 offset
20x10 with 285/30 tire should be at 42 to 44 offset.
This will not rub and will need no camber at all.
A wheel that is 20x10.5 with an offset of 45 will stick out of the fender even with out the tire.
Hope this helps.
Re: Wheel size
How far will it stick out and will it work if I pull the fenders
Re: Wheel size
I have 20x8.5 +18 up front and no mods only "natural" camber from eibach lol fits fine. Nitto nt555 245/35/20. If you want a 20x11 to fit you'd need like a +45 offset for a not so much stretched tire and some camber or slight pull/ higher offset. Why not just get rims with your bolt pattern?
Re: Wheel size
The ones I found are a deal
-
The Bodyguard
- Posts: 1371
- Joined: Wed Nov 17, 2010 9:52 pm
- Car: 08 Infiniiti M35 black loaded custom VIPDOUT
08 Infiniiti G35 S sold 92k miles
08 Infiniiti M45 S sold 78k miles
07 Infiniiti M35 traded 53k miles
95 Infiniiti J30 sold 155k miles - Location: Cypress, TX (Houston) o.g. from southern cali (North Hollywood)!!
Re: Wheel size
Did you factor in the cost of the spacers?? Plus the added fabricating costs??Ke0 wrote:The ones I found are a deal
Re: Wheel size
Well the fender pulling I'm do it myself and with the spacers plus wheels it's still a deal.
-
djkompressor
- Posts: 2
- Joined: Tue Nov 08, 2011 2:10 am
- Car: 2007 M35x
Re: Wheel size
I have a friend running 20x10.5 I believe at -26 offset and had to pull the fenders about a inch and a half I believe on a stretched tires and bagged.. I think you might be ok.. I would just get the wheels so you have no choice but to pull the fenders and add a little more camber for a better stance. 
Re: Wheel size
any pics of the wheels?Ke0 wrote:Understandable. Well the wheels I want are 20x8.5 offset +38 fronts and 20x9.5 offset + 39 but there 5x112 so I'm also gonna put of conversion spacers which is 1 & 1/4 thick. Right now I'm lowered 1.25 all around on espiler awd spec springs from burtman industries. Not sure about camber though