So i bent a wheel a few months ago and took off the bent one (and the other good front one) and put stockers back on for the time being....so just put new rim back on yesterday and also the other good one from storage...and it seems to have some corrosion on it....

any one have any suggestions to dealing with it short of getting a new wheel ...i want to at least make it less noticable..i have the bent one to test stuff on since it also has some corrosion on it....

I would try a product like nevr-dull to start. It often works with metal. If that doesn't work, go a little stronger, possibly using a scotch-brite pad or some fine steel wool (possibly with a little oil in it.) Once you get it cleaned up, make sure you spray a clear coat on it to prevent future corrosion.

ok yeah ill hit it with a little clear coat in the bad spots...good idea