wheel bearing,how hard

[star2nv]

Like the title says, front left on a 2007 altima sedan can I do it or pay 400 for the dealer to do it?

[star2nv]

well i changed it myself, it seemed very easy ,take the brakes off ,then axle nut and the four bouts in the back .but now i have a ticking sound at about 45mph and up ,was told it could be the pin that goes through the axle nut. so i will let everyone know what i find out.if anyone has any input on what they think it could be let me know?

[DJ_B_Easy]

Probably just the Tinnerman pin like you said. Go back in and clamp it down real well.

May I ask what symptoms you had that made you think to replace the hub bearings? I recently changed both of my front bearings, wondering if we had similar issues.

[star2nv]

When I would make right turn it would make a intermittent sound ,you could here it real well getting on and off the freeway.the sound I have now was my mistake,I put the brake dust cover on backwards and it was touching the rigor.

[AlexN09]

When I would make right turn it would make a intermittent sound ,you could here it real well getting on and off the freeway.the sound I have now was my mistake,I put the brake dust cover on backwards and it was touching the rigor.

Do you mean rotor? Just asking because I wouldn't be surprised if I didn't know what a rigor was

[star2nv]

Didn't u know Nissan uses rigors and not rotors, its the lastest and greatest ,lol

[AlexN09]

Hahaha oh now I feel like a noob, I had better get on that search function !!!!!

[amxguy1970]

I got ran off the road not long after I got my new tires, after I had the two replaced I now have a hum sound at 55 mph (goes away above or below that but comes back at 80 mph again only). Anyways, it is a slow hum heard through the right front in about 1 second intervals. It is weird, I have worked on cars my whole life and can't for the life of my think what it is that spins at 55mph that slowly. Anyone have any ideas? Only think I can think of is something bearing wise in that left front like a cv or something. Our old 4x4 truck had a cv go out but it was a constant sound that got louder one way and quieter that other. This sound does get a little louder turning one way and quieter the other which is what gives me the suspicion of a cv but...

Tyler