Wheel Advice

Dedicated to the G37 Convertible. This forum is for convertible-only content that is NOT covered in the other G-Series forums.
ln03fzl
Posts: 1
Joined: Sun Oct 29, 2017 4:09 pm
Car: 2009 G37s Convertible

Wheel Advice

Postby ln03fzl » Sun Oct 29, 2017 4:11 pm

My current chrome wheels are in a bad shape and corroded so I need some help on replacing rims/wheels for my 2009 G37s Convertible. I know some of your might fret over my ignorance and the assumption that I did not do my research. In fact, I did a lot of research. It helped me find some of the answers but some still left unanswered :confused2: , so seeking advice of experts out here.

I'm running Michelin Pilot A/S 255/35/20 in front and 285/30/20 at rear.

I'm interested in going for a flush look with Niche M116:
Front 20x9: Niche Missano M116209065+35
Rear 20x10: Niche Missano M116200065+40

https://www.carid.com/niche-wheels/misa ... 52712.html

Have a couple of questions and need some re-affirmation:
- I’m planning to get 5x114.3 Bolt Pattern, 72.6mm Hub. Will it fit?
- Do I need hub rings?
- Any preferred place to buy?
- Are Niche decent wheels? Hope they don't get bad and corrode soon.

Thanks a ton!


EX35WinterBeater
Posts: 113
Joined: Thu Jun 01, 2017 1:36 pm
Car: Summer: 2003 Honda S2000
Winter: 2008 Infiniti EX35

Re: Wheel Advice

Postby EX35WinterBeater » Mon Oct 30, 2017 8:08 am

The size you're looking at will fit, but you may want some hub centric rings. I know the hub bore on my EX35 is 66.1, not sure if it's the same for the G37 vert, but I'd anticipate it is. That said, I've ran wheels without rings before and was fine, but YMMV. As for the quality of the wheel, my understanding is they're ok, entry level and on the heavy side.


Return to “G37 Convertible Forum”