whats this?

ONLY for ADVANCED technical discussion about the 240sx!
llama_of_doom
Posts: 33
Joined: Sat Aug 12, 2006 3:12 pm
Car: mr2 turbo, s13 240sx

Post

hey can someone tell me what this looks like I did a swap and found these 2 wires by the ps pump that weren't connected to anything. I tried putting them together but it didnt fit so I thinkthey both go to something else. I traced one to the fuse box under the air box and it run there through a wire that goes by the ignition coil on the outside of the engine bay I included a pic of that wire. The other wire seems to be coming from the ps pump its a very short wire it felt like it was coming off of the ps pump



User avatar
Haight90
Posts: 28
Joined: Mon Apr 06, 2009 7:58 pm
Car: 1996 Nissan 240sx

Post

What kind of swap did you do?And was this before or after the swap?

llama_of_doom
Posts: 33
Joined: Sat Aug 12, 2006 3:12 pm
Car: mr2 turbo, s13 240sx

Post

ah this is a 91 240 the swap was a ka24de for another one I just have these two wires that arent plugged in and I dont remember where they go

User avatar
Sileighty_85
Posts: 149
Joined: Mon Jan 19, 2009 2:42 pm
Car: 1991 180SX

Post

the rely small one(with green spot) is for the A/C compressor not sure about the other one

User avatar
locoluna825
Posts: 862
Joined: Fri Mar 28, 2008 12:09 pm
Car: 90 240sx coupe

Post

shes right fix all that rust~!

desertdustr
Posts: 24
Joined: Thu Jun 12, 2008 3:41 pm
Car: 280zx/240sx

Post

Do you have the hicas option? If so it looks like the hicas fluid level light hook-up. You should have some wires going into the lid of the resovoir.

maximaRIP
Posts: 116
Joined: Tue Jul 15, 2008 5:14 pm
Car: maximaRIP 240sx 1976 chevy van

Post

that look by the three picture the connector to the drop resistor i could be wrong,seens on the three picture i dont see the resistior there . IS your car automatic or manual

llama_of_doom
Posts: 33
Joined: Sat Aug 12, 2006 3:12 pm
Car: mr2 turbo, s13 240sx

Post

its a m/t

maximaRIP
Posts: 116
Joined: Tue Jul 15, 2008 5:14 pm
Car: maximaRIP 240sx 1976 chevy van

Post

well if the car was a originally a automatic and your using the automatic ecu you should have no problem if the car not running bad but as for the other plug ,IDk it could be the plug for the barf bag...lol


Return to “240SX Technical Forum”