whats a good setup to build sr20det for drifting..?

[S14Chask]

hi i have an s13 sr20det in my s14 im just curious on whats a good setup for building it for drifting?

like bottom end and top end.

what are good parts?, how should i get my pistons set up? , cams and such im just curious i know id want to build it more for bottom end and so it can handle high revs ive just am not to familar with much thanks

[duffman1278]

You might as well ask us how you want us to make your car look like too. Or what type of cereal you should eat in the morning.

Your question is too broad. Theres all kinds of setups out there. YOU have to look around and READ READ READ. Then decide what you feel best suites your wants. In the end its just going to come down to personal preference.

[pauliedrft]

(First off try searching )but here's a little info ,lsd diff,suspension setup , tires a lot of them .You already have a sr20 so your one step in the right direction .

[motorboater]

well paulie thats not what he asked. read the first post. it is for the motor setup not car setup.

[themadscientist]

bolt in, push accelerator, avoid crashing

[S13_love]

Imo since you are going to do this for drifting and you're gonna be running that motor hard, i would rebuild the bottom end at least...just to play it safe.

[pauliedrft]

Build the bottom end forged everything some calico mains bearing rods bearing , balance the crank , sleeve it ,forged pistons and bigger injectors stand alone ecu .I would search for sr20 builds and see what they have done and figure out which route you want to take .

(Sorry for above post read it wrong but it wouldn't hurt if he hasn't done it yet .)