What would one pull from a 91 Hicas for their 90 s13?

[lbrowne]

There's one just recently dropped off to a wrecker next to the inlaws. What a beautiful hatch save for the punched in rear quarter panel and nose that was hit from the side. It definitely runs and drives thats for sure.

But if I were to pull some goodies for my 90 s13, what should I look at? The seats look in way better shape than mine. But what about the diff? Thats vlsd ain't it? Anything else I might not know about that I should grab from it?

[RideNslidE]

yes it is vlsd and keep your eyes open for suspension i see kyb gr-2 and even some agx on a yard car just didnt have the $ i guess. screw it if you can get some nic nacs screws bulbs fuses grabem youll probobly needem later. good luck

[lbrowne]

Other than the pumpkin do I need the axles? I'm going to check the suspension on that puppy. It definitely has an aftermarket exhaust.

[phuphyter]

Hicas cars had a slightly quicker steering ratio. I don't know if the rack can be transferred, but I'd pull it anyway.

[LanceKA-T]

I would pull the steering rack

All HICAS models came with VLSD, and it just bolt right up

Also, the rear sway bar is larger in diameter

and if the coolant resivour isn't craked grab that as well

[bone_stock_240]

Grab the front bumper. Even with the damage, it has to be an improvement

[lbrowne]

Grab the front bumper. Even with the damage, it has to be an improvement

Thanks, but I'll certainly pass. lol

For those saysing to grab the diff, is that all I need??

[bone_stock_240]

Grab the driveshaft also. Would suck to put the diff in your car and then find out your driveshaft is too long.

[koukicody]

diff rear swayany other parts you need