What wheels and offset do you run?

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
nonvtecaccord
Posts: 224
Joined: Mon Dec 23, 2002 2:50 pm

Post

I'm looking into buying some wheels for my hatch and I can't figure out which ones to buy. So i'm curious what wheels and offsets does everybody run. Post a pick of your car if you want. I'm looking for a simple 5 spoke wheel. I like these but can't figure out what offset they are.



I'm also thinking of the 16inch skyline gts wheels.


nonvtecaccord
Posts: 224
Joined: Mon Dec 23, 2002 2:50 pm

Post

skyline wheels like these.


User avatar
HashiriyaS14
Posts: 14298
Joined: Fri Dec 05, 2003 8:02 pm
Car: '95 Nissan 240SX
'08 Honda Accord
'08 Honda NPS50
'03 Kawasaki Ninja 250
'60 Honda Super Cub
Location: DC Metro Area
Contact:

Post

Those bronze ones look like FN-01RCs, probably at least 9" in the rear, if not wider, with a pretty low offset (hence that "sunken dish" look).


upSLIDEdown
Posts: 133
Joined: Tue Oct 15, 2002 6:09 am

Post

The FN's on that S13 are 17"x10". The 17"x10" FNs are the only ones with the sunken look. The 18"x9.5" FNs are sunken a little too, but not like the 17"x10"s. Wheel choice depends on what you want out of the wheels. Just looks? Performance? Lighter weight? All these things need to be thought about. On an S13, your limiting factor will be the 4 lug pattern.

Bryan

nonvtecaccord
Posts: 224
Joined: Mon Dec 23, 2002 2:50 pm

Post

my s13 will be a 5 lug soon, i'm going with a 5 lug wheel.

nonvtecaccord
Posts: 224
Joined: Mon Dec 23, 2002 2:50 pm

Post

I will be drag racing alot since I live right next to a track, so i'm going for performance and looks.

upSLIDEdown
Posts: 133
Joined: Tue Oct 15, 2002 6:09 am

Post

I would go with a 17x8+25 and 17x9+35 That way you'll clear coilovers and also be able to run decent width tires on them (not have to stretch them) since you'll be drag racing, you'll want as much tire under the back as possible. You should be able to run a 225 or 235 up front and 245 or 255 out back.Bryan

User avatar
SmithSR
Posts: 5021
Joined: Sun Feb 23, 2003 3:16 pm
Car: 240sx

Post

Come ask this question in out Tire/Wheel forum.

This scenario is asked about 4 times each week.


Return to “240sx General Discussion”