What was done to your 240 today?

[breadbox]

^ You still need those creme door speaker things? guessing not?

Helped Tyler with his 240. Meet on Saturday in Newport news that should be good.

[indomiekid1]

got angry because the tires i bought are on back-order, and i just bought new rims.
and i got coil overs last week.
this sucks.

[Seanzyyy]

^ You still need those creme door speaker things? guessing not?

Helped Tyler with his 240. Meet on Saturday in Newport news that should be good.

oh,
sorry, forgot to reply on facebook
lol

nah maaan.
i got free 6 and 1/2 kenwoods and found some adapters on ebay.
they're pretty good,
the holes all line up for the door as well as the speaker.
but thanks anyway

[breadbox]

NP man. 6.5" are so much better. Only thing is adapters are usually flat so it aims straight into the other side and doesn't angle it to the footboard, but I am sure it'd be easy to remedy.

Ordered from Rockauto some transmission stuff at closeout prices.

[240sxcl50]

Ajusted my coilovers and did a little sliding.

[allenms240]

Replaced a/c expansion valve and drier, All ready to get it charged first thing in the morning at 7:30 finally. Can't wait to get A/C/
also, MT-90 gear oil came in, so i did an oil change in the parking lot of my apartment complex. Fun stuff.

[240sxjoe92]

Cleaned a massive amount of tree sap off of it.. Took me about an hour. I used a razor blade, and on some spots i used lighter fluid on a rag which makes it come right off with a little scrubbing action.

[Seanzyyy]

Replaced a/c expansion valve and drier, All ready to get it charged first thing in the morning at 7:30 finally. Can't wait to get A/C/

luckyyy.
only reason i want a/c is for when i first get into my car how flippin scorching everything is

got a sparco sprint junior seat tonight

[costa_rican13]

bought an intercooler for my ka-t3(25x12x3) plus t-clamps and a new trunk lid and also oem spolier. too bad they're both different colors.

[breadbox]

Went with some friends to Pick and pull. I found a maxima and got an Ambient air temp sensor, popout 1 din change tray/drink holder, Keylight ring, Blower resistor, but I couldn't get the sunload sensor out in a timely manor.

[turbonxsx]

Pulled out dash.
Got rid of damn battery tray, mounted aluminum strut for 8 gallon fuel tank..
Found Amphenol circular connector to try to tuck the wiring harness, relocated Odyssey battery in the middle of where console used to be towards firewall....

[Fastazz240]

ordered My clutch Flywheel pressure plate and stainless braided lines for A/t to manual swap along with lines for rear brakes .

[TylerS13]

finally got the damn thing running after 2 weeks full of headaches.

[hoosier240sx]

soldered my wiring harness and burnt my finger sooo f*** bad. replaced my thermostat. received my injen intake in the mail

[zerepdivad]

Drove it to work.

[Raz007]

Replaced the driver's side rear brake caliper........... rolls like a champ again.

[indomiekid1]

was going to mess with egr stuff. decided to check the oil- it was low. filled her up.
done for today.

[Michaelmoore]

Dried out all of the water that 4 days of rain put in the trunk, pulled out the center console and cleaned/painted part of it (looks 1000X better, my mom thought it was new), armor alled the rest of the less than acceptable interior and it looked a little better. I also put my stock suspension on craigslist to try and get a quick 50 bucks.

[PantherRacer]

Yesterday I....Wait, I don't have a 240, I have a Silvia...do I still qualify to post here? lol :pface
moved the seats to check what was under them, put the DCC back in, started to sort out some of the bodywork. Realized there is no space between my coils and tires :S

[speedeast]

Wiring.

[xX RB Xx]

Installed my JDM fog lights.

[rsmithdrift]

Tinted my tail lights and marker lights. LOOKS SICK. Now I'm tinting my windows.

[pacotaco345]

Got my diff welded... Its SOLID gonna be installing it tomorrow

[bmr.S13]

this thread lives lol...

cleaned her inside and out
flushed rad and changed the oil in my diff

[breadbox]

Moved the ground for the maxima keylight and got the steering column together.

[pacotaco345]

Put my welded in.. that was 2 hours of hell and under-car sludge falling in my eye

[cyb3rneticvirus]

flushed my radiator put new coolant, put in and wired up my altima fans

[nightsauce]

Too much

1. New upper timing cover as previous owner stripped the valve cover bolt holes
2. New upper chain tensioner
3. New valve cover gasket
4. New Power steering pump
5. New Power steering hard lines as mine got messed up when i hit a raised manhole cover
6. New thermostat and fresh coolant
7. New Belts
8. New Spark plugs
9. New dist cap and rotor.

7hrs of my day well worth it

[OM3GA]

Thought about it, and cried a little.

[Michaelmoore]

Put my ACL main and rod bearings in, put the head on and torqued it down, stripped the valve cover and degreased the oil pan