what throttle body do I have?

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
kooltacos
Posts: 96
Joined: Tue Nov 11, 2008 4:36 am

Post

I have a throttle body that says nissan on it but dont know what car it came off of. I have an s13sr20det. My tps will not bolt up to it. Its close but wont work. Are s14 sr's different? Could it be an rb. I am just trying to figure out if s14 and s13 sr's should be the same.


User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

Picture

kooltacos
Posts: 96
Joined: Tue Nov 11, 2008 4:36 am

Post

ok take a look

the tps I have is an s13 sr20det blacktop type x. The tb is unknown, my tps will not bolt up. Yeah i know its clocked wrong in the pic but trust me, the crap dont work. The outer ring on the tps is about 1.25 inches. the space between the bolt hole tower things on the tb about 1 inch. What king of tb do I have? I am completely missing something.

ps I sent back the throttle body that came with my swap because it was bent and this is what the jacktards at osaka japan sent me. :facepalm:

and yeah this is AFTER I cleaned it, the thing was covered in a nice layer of butt sludge when I got it.

Image

Image

Image

Image

Image

Image

tintdude69
Posts: 130
Joined: Sun Oct 15, 2006 6:36 pm
Car: 90 Sr20 hatch..

Post

Im pretty sure we ran into the same problem when my buddy wanted to change the tps on his type x engine. Its been a few years so I might be mistaken but for some reason I don't think it was the same as the other sr's. I'll find out tomorrow and let you know.

kooltacos
Posts: 96
Joined: Tue Nov 11, 2008 4:36 am

Post

cool, this is pretty gayyy


Return to “SR20DET Forum (rear-drive)”