what size and offset are this rims

Post by **o0ohferrealz** » Tue Nov 28, 2006 5:33 pm

i know this is a bad pic but i was just wondering.

Post by **Mr1der** » Tue Nov 28, 2006 6:07 pm

kinda looks like a 15X7....I've got no clue to the offset.

but it looks like a rotary in it!

Post by **evildky** » Wed Nov 29, 2006 9:32 am

terrible angle to ask a wheel question, and I'd say it looks more like a 14" stock 240Z fits a 15x7 with a zero offset, i suspect the dime can fit about the same, and thats about as big as you can go on a stock suspension, add coil overs and you get another inch and a half of backspace

and the bolt sircle is 4x4.5 or 4.114.3

and that looks like an L4 valve cover to me

Post by **datsunboy** » Wed Nov 29, 2006 11:59 am

Mr1der wrote:kinda looks like a 15X7....I've got no clue to the offset.

but it looks like a rotary in it!

A rotary???do you know what a rotary looks like?have you ever seen a L16/L18/L20b before?

that looks nothing at all like a rotary, and everything like a L16/L18/L20b.....

from the angle of that pic, if it had a rotary, you would only just be able to see it, since they are small engines, and sit real low in the engine bay

Post by **Mr1der** » Wed Nov 29, 2006 3:43 pm

yeah....had I really been looking, I'd have noticed the huge valvecover, sign number one it's not a rotary...

I've sadly only gotten to stick my head under the hood of maybe one dime in person, most any Datsun I see around here is either a Z or a Fairlady Roadster.

now, please excuse me while I go remove my foot from my mouth

Post by **evildky** » Wed Nov 29, 2006 6:02 pm

maybe the black one behind the blue one has a rotard engine, I can't see that far

Post by **datsunboy** » Thu Nov 30, 2006 11:36 am

yeah, hopefully not tho!people putting rotary's in Datsuns disgust me ....lolkeep it Nissan/Datsun!plenty of great engines to choose from!

Post by **Mr1der** » Thu Nov 30, 2006 4:23 pm

I agree.

I don't much care for Mutt cars...unless it's a Lotus.

Or someone puts an FJ in anything.

Post by **evildky** » Thu Nov 30, 2006 6:38 pm

and my pet peeve is gnawing on my back.....it's "wheels" not "rims"

......someone will undoubtedly question this, do yourself a favor and do a bit of research before making yourself look uneducated

Post by **nsrZ32** » Fri Dec 01, 2006 2:17 am

^ he is 100% correct

Post by **Mr1der** » Fri Dec 01, 2006 8:01 pm

evildky wrote:and my pet peeve is gnawing on my back.....it's "wheels" not "rims"

......someone will undoubtedly question this, do yourself a favor and do a bit of research before making yourself look uneducated

sometimes I just want to know the size of a part of wheel though? is it a crime I ask!

Post by **evildky** » Mon Dec 04, 2006 11:27 am

Mr1der wrote:
sometimes I just want to know the size of a part of wheel though? is it a crime I ask!

I had to read this about 4 times before I could comprehend it last night, drinking bad

Post by **Mr1der** » Mon Dec 04, 2006 5:37 pm

I'm not sure if you meant I'm drunk or you were....

either way...comprehending doesn't get any easier that way.

Post by **evildky** » Mon Dec 04, 2006 7:23 pm

I was a bit hung over and perhaps still a bit drunk, the older I get the more it hurts

what size and offset are this rims

what size and offset are this rims

Re: (Mr1der)

Re: (Mr1der)

Re: (evildky)

Re: (Mr1der)

Re: (Mr1der)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums