What's the hp guess?

[Florida240sx]

Arias 8.8 pistons and crower v2 cams. Some aftermarket header with 3" BRM exhaust. Got the engines swapped out today. Just need ot hook up driveshaft,raditor, and wiring harness

[eazye2000]

Boosted?I would hope you're not 'all-motor' with 8.8 pistons..Or 'were' you boosted, and just took everything off?

Clueless,Eric

[S13FX]

Arias 8.8 pistons and crower v2 cams. Some aftermarket header with 3" BRM exhaust. Got the engines swapped out today. Just need ot hook up driveshaft,raditor, and wiring harness

are you drunk at the moment?

[Florida240sx]

are you drunk at the moment?

No, it can be arranged though... WD knows what I'm doing...This thread is a temp thread until dyno. After dyno I'll have the project build of this car for the 2nd time...

[jdmnancy]

torque X RPM DIVIDED BY 5,252, HOPE THIS WORKS,

[480sx]

175-180 if your lucky, and you have a fresh ignition system lol, but why waist money on a NA dyno.. IDK how it is in your area, but dyno runs here are crazy expencive. The only dyno in town is a AWD dyno, one of two in the US, 2000 HP.. You dont even wana know the hourly on this bad boy lmao.

[Florida240sx]

Like 60-90 for 3 runs with wideband and boost. So I have before and after charts Also to see how the V2 cams pull NA... And to see if there is any hicups in my motor....

[Brandon93240]

Who told you there were only 2 awd dyno's in the U.S.? You can get 3 pulls in Houston at most shops for about 40-50 bucks if you've bought something from them in the past.

[kpc_0721]

Im running a rebuilt ka with the same pistons and I still dont have it boosted....is it really that bad to run a lowered compression motor like mine NA for the time being? I plan on boosting it but quit my job and dont exactly have the money to finish it.

[S13FX]

Its not bad to run lower compression.

Its just that with lower compression you wont make any real power NA mode.

[kpc_0721]

yea my car feels like a turd right now even with sum dc headers ngk plugs n wires and a cold air intake.....n dont worry this setup is only temporary until I start balling again with my $10 an hour hahah

[480sx]

Who told you there were only 2 awd dyno's in the U.S.? You can get 3 pulls in Houston at most shops for about 40-50 bucks if you've bought something from them in the past.

I guess i should have been more specific, two AWD dynos of this brand. Supposedly its a super expensive dyno that tells your HP rating better than the rest.....

[eazye2000]

This is the one we got about an hour away from me..

http://www.enhancedstreetperformance.com/dyno.html

Hopefully heading there by the end of the month to tune my car.

[Brandon93240]

Looks like a legit place, what do they charge? Also with dyno's usually theres more user error than the dyno not being accurate. There's always big debates about this and that, but thats why there's math to correct it all.