What other coilpacks can i use on the ca?

[CaEric]

I know the rb20 coil pack works but will the 300zx coilpack work ?

[dvd]

i think the 300zx is a little thinner, it wont be direct bolt on but somewhere on here told me they've done it

[Bwana]

If you need some CA packs drop me an email, I have a set...

[OmarM]

Are there any aftermarket coilpacks that can be used

[teddy]

Are there any aftermarket coilpacks that can be used

Splitfire rb26 coilpacks, but obviously you buy 6 coilpacks instead of 4. Or, if you're lucky, FET used to make ca18 sets, and every once in a while you may get lucky and find a set. But most of us won't ever see the need to upgrade what we've got.

[float_6969]

The CA18DET in the 1988/89 Pulsar NX SE has coil packs. If you want new ones, try the parts store, otherwise, find a local junkyard.

[1via]

I brought one from NAPA for $85. Just one. There expensive.

[float_6969]

Yea, I usually hear $75, but still not cheap regardless.

[NismoBgt]

I belive q45 coil packs work. I have sceen them in the Junk yards. Nobody ever screws with them. All they seem to take is the AFM. Try them. I know the ignitors are a direct swap so...

[Bwana]

I belive q45 coil packs work. I have sceen them in the Junk yards. Nobody ever screws with them. All they seem to take is the AFM. Try them. I know the ignitors are a direct swap so...

Could be... I may even have some around from swapping the engine in the Q. If I can find them I'll compare them to the CA packs and let you guys know.

[iliketocrash]

i heard once somewhere that you can use coilpacks off of some chrysler. i wanna say a 300m or something funky but i can't remember off hand. then again it might be for use on a completely different car. just thought i'd throw that out there though.