what MESH wheels from other cars fit240

[djpotential]

I want to get a set of used mesh with a decent lip for my 1990 240fastback. What other cars could i pull them off of in a junk yard? I eman what came stock on others that would work?

[KDashy]

As far as I know there arent any cars that come stock with good looking mesh rims with lips.

[SmithSR]

lincoln towncar 5-4.5 16" lincoln LHS 5-4.5 16"

search around for the exact years and trim levels that included mesh with polished lip.. can't be spoon fed forever. You never knew American Iron was sporting the latest fad trend from JDM option videos did you?

[Chingon]

mazda fc vert... 15" 5x4.5 6.5" width, BBS 11lbs. But alas, I think the center bore is too small.

[MainEvent212]

if you convert to 5 lug you can get Mercury/Ford Crown Vic rims i'm pretty sure

[ZeroS13]

Old school Datsun Z rims but they're on the small side (14") which won't clear larger brakes if you've got 'em. Early to mid 80's Celica/Supra or as a last resort AE86. SSR reverse mesh rims in 15x8 or 15x9 with low offset & fat 3" lip would be sweet.

Good luck!

[Clatch]

There's and old Datsun 240Z with 14'' gold mesh rims and silver polished lips down at a local junkyard. How much do you think they would give them up for?

They look like these
Modified by Clatch at 12:14 AM 11/7/2004

[Altiman94]

the only way you can know is to go down and ask. If it's too much, make an offer. They'll work with ya

[Clatch]

If their too much how, what kind of an offer should I make them? For instance, how much do you think they are worth?

[djpotential]

Ok there has to be more option out there that you guys have used///// anyone?

[240marcuSX]

look for the thread called,"new rattle paint job" or something like that,he has 280zx turbo wheels on his and i think it looks sweet, not really mesh but still

[CybeRise]

You can also get them off a 280ZX Turbo models. They have a clean design and they are 15s i think.

Or if you change it to 5lug the factory Starion rims are awsome!

[SmithSR]

Ford Part # F7AC-1007-AA are the 16x7 mesh wheels that are often seen on Crown Vic, Towncar LHS etc..

There are different P/N's for the different models, but that is the number from a Crown Vic wheel.

"Made in Italy" oooh to be IDM instead of JDM?

[HashiriyaS14]

Lots of BMWs came with Mesh wheels stock, although I have no idea about the sizes/PCD. Anyone know?

I saw some sweet stock meshies on an older 5-series today, just lose the center caps.

[Revat619]

iirc, bmw's are 5x120.

My dad has a 540i and his wheels dont fit on my car.

[SmithSR]

There is a comprehensive list of what vehicle makes/models will and will not work on 5-4.5 bolt pattern and on Nissan 66.06mm hub bore

It is found in the wheel/tire section in Chet's sticky. Please use the info here at NICO. That list alone took one hour to type up. Don't let it go to waste

[skydragoness]

There is a comprehensive list of what vehicle makes/models will and will not work on 5-4.5 bolt pattern and on Nissan 66.06mm hub bore

It is found in the wheel/tire section in Chet's sticky. Please use the info here at NICO. That list alone took one hour to type up. Don't let it go to waste

240 general chat is not the place for wheel/tire/suspension questions.