what kind of clutch do you use

Post by **xckid** » Mon Jul 18, 2005 3:14 pm

Okay after 172XXX mi. my clutch is no giving out, and was 1dering what type of clutch i should get you know just point me in the right direction. So ethier what kind you have wish you had. this is my daily driver. at the moment stock. Does any one have or ever tried a XACT flywheels.

Post by **Axel Grungy** » Mon Jul 18, 2005 5:14 pm

exedy woooo!!!

Post by **nismofly** » Mon Jul 18, 2005 5:29 pm

^^^ how much did that run you?

im in the market too, clutch isnt dead yet and theres other stuff i need to do first but ill need one for the turbo

Post by **skydragoness** » Tue Jul 19, 2005 6:41 am

Axel is referring to the OEM-spec Exedy clutch, they run anywhere from $100 to $150 I think. They're good clutches, my friend has on his fastback with the fidanza flywheel i sold him. Very responsive/quick to grab.

Post by **biggie** » Tue Jul 19, 2005 7:24 am

Definately go with fidanza flywheel.

I've got a SPEC Stage 2 right now, recommend for NA purposes. I've heard of problems with them and I'll switch to ACT after boost is applied.

Post by **bentsprocket** » Tue Jul 19, 2005 8:11 am

Spec stg II. No issuse's here. Nice low pedal and smooth engagement. Grabs and holds no slipping what-so-ever. IMO best I've had. Centerforce was the worst but hot spotted flywheel might have had been relative.

Post by **ETTInnov04** » Tue Jul 19, 2005 10:18 am

Exedy stage I. No complaints I love it...smooth.

Post by **got_boost702** » Wed Jul 20, 2005 12:46 am

Not trying to jack post....

What clutch would you recommend for 400hp SR20s?

Where is the best place online to get clutches for SRs?

Post by **whiterps13** » Wed Jul 20, 2005 9:43 am

i have a centerforce stage 2. compared to other aftermarket companies, it is way easier to drive everyday. act, exedy, and spec are also some other good ones. ive heard a ton of good things about the act kits.

Post by **InsanityInc** » Wed Jul 20, 2005 10:34 am

I'm just using an aftermarket OEM replacement clutch I bought from autozone. Not sure how much torque it can hold, but I'm probably making somewhere between 160-180wtq and it doesn't slip.

Post by **Meantime** » Wed Jul 20, 2005 11:04 am

ACT Street/Strip is a great clutch, kind of pricey but the response and feedback is awesome and it's fully streetable. Don't remember exactly, but I believe it holds up to 300hp (SR).

Post by **InsanityInc** » Wed Jul 20, 2005 11:09 am

Meantime wrote:ACT Street/Strip is a great clutch, kind of pricey but the response and feedback is awesome and it's fully streetable. Don't remember exactly, but I believe it holds up to 300hp (SR).

I wouldn't trust a clutch that had it's holding capacity rated in horsepower. Torque is what is directly working against the force of friction of the clutch and pressure plate, not power.

Post by **Meantime** » Wed Jul 20, 2005 11:22 am

It had two ratings, the second one was for torque (~350 ft/lbs IIRC).

Post by **david200095367** » Wed Jul 20, 2005 12:17 pm

i have a clutchmasters stage one up to 270 ft/lbs. works great!

Post by **base9se** » Wed Jul 20, 2005 12:32 pm

ACT

Post by **574-240sx** » Wed Jul 20, 2005 8:21 pm

+2 for ACT

Post by **Dattebayo** » Wed Jul 20, 2005 9:05 pm

+3 for ACT, but only if you buy SPRUNG clutches...

Post by **Thee 240sx Owner** » Thu Jul 21, 2005 1:24 pm

98 SE... sold my ACT Stage 2 when i sold my last motor..

Post by **xckid** » Thu Jul 21, 2005 6:10 pm

Yeah im thinking of going with ACT

what kind of clutch do you use

what kind of clutch do you use

Re: (nismofly)

Re: (biggie)

Re: (bentsprocket)

Re: (Meantime)

Re: what kind of clutch do you use (xckid)

Re: what kind of clutch do you use (xckid)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums