What is this, and how do I remove it?

Post by **l0nestar** » Thu Dec 07, 2006 9:51 pm

Same as above. I need to unplug-remove whatever this piece is, there are two of them on the Intake side of the block. I would have taken more pictures, but my camera died Also, what is it? I tried looking through the FSM, but could not find anything This is the last piece of the last harness I have to remove so I can send them away to be mated together! I assume Kamin or TMS will respond always full of knowledge!

Post by **themadscientist** » Thu Dec 07, 2006 9:55 pm

Is it a green sensor screwed into the block?

Post by **l0nestar** » Thu Dec 07, 2006 9:58 pm

Yes. has a white casing, but has green on the inside.

Post by **themadscientist** » Thu Dec 07, 2006 9:59 pm

one spade terminal inside? Could be your knock sensors.

Post by **l0nestar** » Thu Dec 07, 2006 10:06 pm

I dunno, I have yet to remove it =P There is one plug around cyl #2 and one around cyl # 5. Both are identical in size and color. How do I remove it? It looks as though it has two places to pinch and remove it, but I have to use a set of long needle-nose pliers and cannot remove it as of yet.

Post by **l0nestar** » Thu Dec 07, 2006 10:08 pm

Pic. I resized it to 25%.

*edit* WTF? The file is 34k in size, why can I not post pics now??girr

Post by **Yellow4g63** » Thu Dec 07, 2006 10:09 pm

errr that sounds like your knock sensor. Are they dead? running a standalone?

Post by **l0nestar** » Thu Dec 07, 2006 10:12 pm

No, nothing wrong that I know of... just trying to remove so I can send my harnesses out to be re-wired.

Post by **l0nestar** » Thu Dec 07, 2006 10:16 pm

Alright, assuming it is the knock sensor, what do I need to do to remove / un-hook it so I can send my harness off?

Post by **l0nestar** » Thu Dec 07, 2006 10:29 pm

I assume this is what you are both speaking of.

zerothread?id=148962

The pic is bad-- no-existent, but it seems to be what I needed. Thanks for clarifying what the sensor(s) are.

Post by **l0nestar** » Thu Dec 07, 2006 10:40 pm

Sensor leads removed. Thanks for the help TMS and 4G63.

Post by **Blown240sx** » Fri Dec 08, 2006 5:46 am

why are you removeing sensors from the block? You dont need the sensors out to send off the harness.

Post by **Darius** » Fri Dec 08, 2006 5:51 am

He's not removing the sensors. He was just wondering how to disconnect the clips from the knock sensors so he can remove his harness.

Post by **Joe** » Fri Dec 08, 2006 5:57 am

i hate those damn clips on the knock sensors.

Post by **Bluefire** » Fri Dec 08, 2006 6:30 am

squeeze really really hard...

Post by **themadscientist** » Fri Dec 08, 2006 1:19 pm

One more reason to go RB20, the knock sensors unplug easy!

What is this, and how do I remove it?

What is this, and how do I remove it?

Re: What is this, and how do I remove it? (l0nestar)

Re: What is this, and how do I remove it? (themadscientist)

Re: What is this, and how do I remove it? (l0nestar)

Re: What is this, and how do I remove it? (themadscientist)

Re: What is this, and how do I remove it? (themadscientist)

Re: What is this, and how do I remove it? (l0nestar)

Re: What is this, and how do I remove it? (Yellow4g63)

Re: What is this, and how do I remove it? (Yellow4g63)

Re: What is this, and how do I remove it? (l0nestar)

Re: What is this, and how do I remove it? (l0nestar)

Re: What is this, and how do I remove it? (l0nestar)

Re: What is this, and how do I remove it? (Blown240sx)

Re: What is this, and how do I remove it? (Darius)

Re: What is this, and how do I remove it? (Kamin)

Re: What is this, and how do I remove it? (Bluefire)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums