What injectors fit the ca??

[cuzan0]

Ok guys i am wondering what injectors will fit the ca i know the skylines do but how about the other cars that are made here in the states like the rx7 tubo which i think are like 550cc,the turbo supra 440cc i heard and the mitsubishi eclipse turbo wich are 440cc i heard....if anyone know please respond cos i can get all of these at my local yard at a good price and saves me the waiting time...i know i can get them from japan but i dont like waiting and it would kill me if you can use the ones from the other cars i stated cause they are much more easier to get...

[NeedCAforS13]

hehe sorry i forgot to ask for ya' cuzan0!:D doesn't anybody know! TMS you should know this;)

Sean

[CA19DET]

check out http://www.splparts.com they have 700cc injectors that are a direct swap for the CA

http://www.splparts.com/Silvia/Engine/Fuel.asp

[slw240sx]

supra ones should woek.. we will find out next week!!

[cuzan0]

yeah i wasnt looking for aftermarket injectors.... i was looking for injectors that i can easily pick up at the local yard from 440cc to 550cc and that would be fairly cheap then buying them from aftermarket stores or even buying them from japan

[GoofyATX240]

93-95 (RX7) and whatever other year is thats the same as those. Supposedly drop right in. Im looking for some too I just wanna make sure they fit hehe.

[themadscientist]

got 5 GT-R 444cc injectors, they drop right in.

[NeedCAforS13]

he doesn't wanna wait for shipping from japan!

Sean

[cuzan0]

hahaha,sean!!! i just wanna go to the junkyards here there are 2 turbo II mazdas in the yardhas injectors still and 1 turbo supra and i dont know which one to get and if they will even worki have a safc to control the injectors but i wana make sure if they work....i'll wait till jon gets them supras in and see if they work or not...

darrell

[CA18Fastback]

the 550cc Rx7 Turbo II injectors ARE a direct drop in. I NEED a set very badly and I cant find any. cuzan0-if you can get a set of 4 from the junkyard(assuming they work) i'd be willing to pay for them+shipping+a lil for your time. Actually, if anyone can get me 550cc or more injectors for a reasonable price I'd be interested.

thanks!-Ian

[slw240sx]

TMS , how much for the injectors ???? id like to brag to the ricers here that i got skyline injectors!!! they would all be like

ooooo ahhhhh man i bet thats fast

[cuzan0]

CA18Fastback,i will check them out tomorrow for the injectors ok and do you know what is the flow on the N/A mazda rx7 13b

darrell

[themadscientist]

$150.00 shipped for the five.

[cuzan0]

Ok i traded my ka24de motor,trans ecu and harness for a used garrett t28 and a garrett T04b i know i can bolt up the t28 but can i use the T04b with a new manifold well im going to weld a t4 flange on it and put on a racegate my ecu is chipped to run GTR injectors and i have a walbro fuel pump,is that enough to run the T04b??? thats why i was asking about injectors in my last post...oh yeah if my ecu is chipped for gtr injectors is it ok to go higher than the 444cc???

darrell

[themadscientist]

It will run rich across the board if you get bigger injectors with the same turbo. If you get larger injectors and a larger turbo you have too many variables to predict. If you have a SAFC and you don't go real big over the setup that the ECU was tuned to you should be able to trim it out.

[cuzan0]

yes i have the safc but not hooked up yet.well can the 370cc run the t04b??

[1fast200]

People, what about the impedance (ohm) of the injectors?? I know the CA18DET has low impedance injectors and if I'm not mistaken the RX7 has high impedance!

Can you run High Ohm injectors with an ECU that is programmed to run low Ohm injectors from the factory?

[themadscientist]

every hogged out high power CA I have seen is running 720cc primaries. What is the HP expectations for the B you will be running?

[cuzan0]

i want least 250-300hp from my motor, right now i have on my car is a stock motor,T2 small T25, 3" piping from exhaust dump pipe all the way back wid a 3" high flow cat., rechipped ecu, cheap a*s*s* manual boost controller, NPR front mount intercooler wid aluminum ic piping made from honda intake pipes, walbro fuel pump,apexi air filter wid elbow extension, 2nd stage 6 puck sprung hyper clutch kit,apexi 2nd gen. s-afc,turboxs bov,blitz DTT DC II turbo timer , Z32 front calipers,and that's all on my car right now and is running....Now for the stuff not on my car and sitting in my toolbox at the shop,Garrett T04b,Garrett T28,ca18det stock manifold to be modified to fit the T04b and a model so i make make a log style manifold wid external wastegate,HKS IV electronic boost controller,HKS Metal Head Gasket(86x1.0mm),and thats all for now, these parts are all sitting in my toolbox waiting for more parts and another long block to build up..is anyone selling a longblock???

Darrell

[slw240sx]

yo man , ibeen meaning to ask but keep forgeting, can you hook me up on the ECu chip! mines broken after the little run in it had with the washing machine

[1fast200]

I asked before, but no one replied!

You say that you can swap RX7 injectors.

CA18DET has low Ohm injectors, the RX7's has high Ohm.What about the CA18DET ECU? Can this be done without affecting the ECU?

[slw240sx]

thrown in some resitors, im goin to do a search we talked about this in debth maybe 2 monthes ago and there was a answer for it

[alfred183]

I quote my friend:S4 FCs used low impendance, whereas the S5s used high.FDs use 2 550cc for primary and 2 850cc for secondary, both high impendance....

so, how about just using S4 injectors?

[cuzan0]

hey alfred what are the cc's on the primary and secondary injectors on the S4 FCs and they are low impendance??

darrell

[alfred183]

all FCs used 550cc as primaries, he says.

eh... http://www.az240sx.org/bb/viewtopic.php?t=2058(i'm talking about myself, btw )

[cuzan0]

and the secondary injectors are what cc's on the S4 FCs????

darrell

[MrBob 86]

The 84-85 Rx-7 GSL-SE uses 2 680cc low impedance injectors. The 86 thru early 88 N/A Rx-7s use 4 460cc low impedance injectors. The 87 thru early 88 Turbo Rx-7s use 4 550cc low impedance injectors.