What factory nissan wheels interchange with 240's

[marcmann982]

Hey guys ive got an 89 240sx and ive been wondering for the longest time what year 240sx wheels actually interchange with each other? ive heard 89 -94 s13's but is that right? And wat other nissan or other cars wheels with interchange with s13's. Or is there some kind of interchange manual or something i keep searching but i find nothing no where and no one knows ne thing . help me out please

[tctomasc]

anything with a 4 bolt 114 (I think its 114) pattern will fit. Try not to go over 9 inches in width, but you will find a lot of wheels fit on the s13, nissan made or not.

[srpowered240sx]

this should be in the wheel/tire forum. starion, old rx7, sentra, cressida. but the offset is more important, and not many match up well, ive seen the starion wheels look ok, and the sentra wheels look alright as well.

[silvia_twins]

Make sure you pay attention to offsets when purchasing wheels. For example if you were to use wheels from an FD the offsets are going to be higher due to the design. I am not sure what the lowest offsets you can go with stock fenders but also remember that some camber and tire sizing will play a factor in it as well. To get back to your qustion about wheels though if its 5 lug all 5 lug nissan 240s will interchange if its 4 lug all 4 lug nissan 240s will interchange. I say save your money and get anything BUT stock wheels but thats just my .02

[Soravia]

2003 Sentra Spec V optional NISMO wheels. No spacers. 1.5" drop with Eibach Pro springs.

[Dittoz7]

Pretty Much Depends...

4 Lugs Or 5 Lugs.

[johnny butt]

Pretty Much Depends...

4 Lugs Or 5 Lugs.

i'm using 300zx wheels and with the right tires they fit perfect.

[ThuG LyFe]

some of the "stock nissan wheels" that look good on a S13 is the sentra spec v 5 spoke wheels. they kind of concave in in the middle and looks alright for a stock wheel. or the 91-94 S13 SE wheels look good as well.

if you want to go 5 lug the SE wheels from S14's and some 350z wheels look good too. all upto you but i'd save money and get some fn01r-c's or something.

[marcmann982]

4 lugs guys lol so the 300zx wheels will work on stock s13 4 lug setup ? i heard about the spec v's but yeah

[nzmoman]

you will find that the selection of good four lug wheels is smaller than the 5 lug option. I would consider starting a 5 lug conversion. maybe do the rears first and then the fronts, but you are going to have a better selection of factory and aftermarket choices once you make the switch. That is mostly assuming you like larger wheels and wider widths like the most of us.

[EstoMax]

go with a 5 lug conversion and then any 350z/g35 rims will fit perfectly. they look flush and hot.

stock 03 350z wheels:

[johnny butt]

4 lugs guys lol so the 300zx wheels will work on stock s13 4 lug setup ? i heard about the spec v's but yeah

No. My car has been converted to 5 lug hubs. 300zx wheels won't bolt up to your stock 4 lug hubs.

go with a 5 lug conversion and then any 350z/g35 rims will fit perfectly. they look flush and hot. [/img]

He's got an S13 so I doubt 350z wheels will fit the same. However, if someone would like to confirm whether or not it would work, I am actually considering getting 06+ OEM 350z wheels (I think they called them the Touring Edition wheels?). I'm just not sure if they'd fit or if the offset would be right?