What else do i need

[BigMike]

Well, for my ka-t setup, i was thinking of doing the boost designs stage 1 kit with SR injectors and a JWT ECU with the stock MAF. The BD kit looks pretty complete, so I was wondering what else, if anything, I would need for a complete kit. I will be boosting 8psi, and the JWT ecu wil take care of timing retard and fuel delivery, so i think i basically got everything covered as long as the BD kit comes with oil feed and return lines. If i ned anything else just post up something.Thanks, Mike.

[turbo90]

you will need some high speed blinker fluid. and a few granny shifter bushings. If I'm not mistaken, the hardest part for you will be having the oil return bung welded, or soldered onto your oil pan. 7/8 ths of an inch below the flange and as close as you can to the back of your A/C pump.everything else should fall into place. the kit does include oil lines

[Craving4Boost]

exhaust and walbro fuel pump