what all do I need to rebuild?

[shadow240sx1991]

What all do I need to rebuild the engine? This is all i got so far

Pistons and rodsNitrous equiped titanium covered valve springscam shaftsnew gaskets

What else do I need?

And were can I find some good, but cheap coilovers?

[MoldyOldy240]

It all depends on how much you want to *rebuild*

I would suggest everything; water pump, harness, sensors; EVERYTHING changed out for new; so that you start on a new platform.

Theres no written in stone for a rebuild though;

but the rule of thumb is replace anything that requires alot of work to fix.

[devil_child]

timing chain set, piston rings, crank and rod bearings, rtv sealant, assembly lube, oil pump, oil pump collar sometimes, water pump, new serpentine belts, pcv, oil,oil filter, fuel filter, air filter, spark plugs, antifreeze, block and head surface machining, cylinders honed, carb cleaner, NEW headbolts, ECT sensors, o2 sensor, remachined flywheel, new clutch and pressure plate, pilot bearing, throwout bearing, AND DONT FORGET THREADLOCKER

Thats to do it properly. Personally I'd also do wires, cap, rotor, and coil.

BTW cheap and coilovers should never be used in the same sentence, unless its to A. say coilovers arent cheap, or B. say I've got some BLOWN coilovers needing a rebuild for cheap.