What 6 lug rims

[RT22]

from other trucks have our bolt pattern? I want some 16 inch wheels 7 inches and want to know what vehicles share out 6 lug pattern. Thanks

[JC87HB]

I know the Chevy Colorado has a 6x5.5 bolt... and i have seen some D21s with Hummer rims lol

[JC87HB]

http://www.wheels-and-rims.com...19561

I really like these rims alot though.. I am going to get one for a spare

[Q451990]

I'm a fan of the early Infiniti QX4 wheel.



I will be putting them on my Frontier soon. They are 16x7's and the offset is correct for my application. Pretty much any Pathfinder or Nissan Truck wheel through 2004 will fit. Check the owner's manual for the offset to make sure you're where you want to be. 2005 was the change over for a different bolt pattern.

Heath

[RT22]

Thanks guys, I just want a larger wheel as 14 inch tires are actually more expensive as they get more rare on stock cars. I hate the 6 lugs on this truck. Love my nissan but the 6 lug makes wheel selection real small compared to say a 5 lug chevy s10. Damn you nissan LOL

[silveradobeast]

i know that alot chevy rims work too

[GRNMACHINE]

Isuzu Axioms have the same bolt pattern (I would assume Isuzu Rodeo's as well but not sure). Some Toyota Tacoma's have 6x5.5 as well.

[silveradobeast]

i also like the titan rims on the hb

[Gogolinskiy]

Extera rims bolt on no problem just look for 6x137.9 i think.

[pejsa s-13]

yea the titan steelies look wicked on hb's

[GRNMACHINE]

It's actually: 6 x 139.7

[Gogolinskiy]

i knew i mixed some numbers up:))

[pejsa s-13]

i want both of these sets of wheelsso rareso sex

ssr auswuch

and a set of volks i have never seen



i want these

[Gogolinskiy]

those are sexy!!!

[GRNMACHINE]

Those are different, never seen anything like them. Would like to see them installed. They could look really good with the right color. Different and Rare.

[pejsa s-13]

yea those on some low pros on a dropped hb SEXI

[goomba1]

smaller toyota pickups have the almost the same 6lug pattern just the hub size is bigger so you would have to get a set of hub rings made to fit your hub. i have a set of them on mine just no hub rings and trust me it looks good but unless its torqued way past specs its not safe for dd or anything. hope that helps!

i do love the way the titan wheels look on hbs tho!

[jdamion]

those would be SICK. why dont they still make these?

[s13_jesse]

i have isuzu rodeo 16x7.5j wheels on my truck. i think most isuzus are 6x139.7 like nissanssorry for the s***ty pic

[GRNMACHINE]

Axioms & Rodeos are the same pattern and their wheels can be used on R50's

[pejsa s-13]

did you have to mill the hub?

[BronkStang]

chevy silverado wheels are 16x7, few guys run those.

the 3 piece wheels above are AWESOME

theres these

installed

i kno some people running these on their hb's they look clean

[pejsa s-13]

im runnin the nismo's and i love them but i wish i would have saved a little more money and bought the countersteer's

[pejsa s-13]

actually just found these and i want them really bad now any one wanna buy my practically new nismo's lol

http://shopping.netsuite.com/s...67/.f

[Rev_D21]

Let me see how much my tax return will be this year and I may say yes.

[Ironwoodcruck]

I know they are 17" but there is always the escalade rims which you will have to bore out the hubs on, but they look great.

[RT22]

The konig counter steers look good and come in black titanium bronze and silver, may check those out. I just hope they stay under the fenders. 16x8 I could run a 245 50 and still have decent sidewall for curb hopping. I use my truck as a truck and need some tire sidewall for the type driving I do.

[GRNMACHINE]

I ran the Nissan wheels on the Isuzu, never put the Isuzu wheels on the Pathfinder. They appeared to have the same center bore to me.

Also have a set of Konig NRN. Really like those wheels but they dont make them anymore.

[moneymike]

ive been trying to find those nismos in the bronze finish for the longest to throw on my truck about how much do they go for?

[pejsa s-13]

money mike im sellin mine

and let me know rev id be more than happy to hook you up