Were can I get a Downpipe Gasket ??

[72nismo]

Were can I get one or can I make one?? Here is the picture of the turbo it will connect to. As you can see it has a 4 hole pattern . I seen some on Ebay but they are not the right size diameter. They are to big. This only has a 2" diameter .

[Craving4Boost]

if your using a cast DP you don't really need a gasket.

[72nismo]

Well im having the flange made and then I was going to get the muffler shop weld the pipe. So I guess I will not be using a cast DP.

[onosqv]

I'm using turbo cement/hi temp gasket from jgsturbo.com for any pieces i can't get a gasket for, hee hee.

[72nismo]

That works with no problem? No leaks??

[onosqv]

2000 deg. Gasket maker

For sealing turbo/manifold/wastegate exhaust connections, apply and let sit for 1 hr then warm engine to set. Will not burn out, cleans up with water, black in color. 3 oz tube, perfect of turbos without gaskets available.

One tube will do several turbo sets!

11.99 USD

[72nismo]

Thanks.

[NateDogg]

I use muffler cement. Same thing probably.

[hnugen]

I'm using turbo cement/hi temp gasket from jgsturbo.com for any pieces i can't get a gasket for, hee hee.

that's one broke *** 240! lol I did the same but I'm even more of a cheapskate I use the copper RTV you see at the local parts store..sure hope it holds. BTW, where did that turbo come from? is it Garrett?

[KATwo40]

FWIW, I bought a whole can of stove/fireplace cement from Lowe's Home Improvement the other day for about $4.00. It's good up to 2100* F and I just made a 850mi (total) trip over the weekend with no issues. The seal is still good, and let me tell you, there were many many many miles of high speeds/heat off the turbo. (Drove from about 30 mi. North of Indianapolis to Knoxville, TN in 5hrs, 40mins and stopped 3 times for restroom)

[WDRacing]

Sweet...really good idea, I'm a Home Depot/Lowes fool

[72nismo]

Yes its a Garrett. Came off an FJ20 Turbo motor.