Water temperature sensor adapter Z1

[93Z]

I bought the in line sensor adapter for the water temperature sensor from Z1 and do i need to drain the radiator or can i just loosen the hose and just let the fluid run out of the hose or how i go about taking it off. I can do the install. Thats the only question i have. I didn't want to remove the pipe and have coolant fly all over my car. Also if i remove the radiator cap will that relieve the pressure?

[Ziggy1621]

You should be able to just pull that hose and drain that hose. Probably wouldn't hurt to pull the cap first. Make sure the car has cooled for a while first

[93Z]

Great thanks

[Ziggy1621]

no prob...