wat do these go to? please help!

[xDRFTurR1D3x]

found these and have no iddea where they go. please help me this is all thats left of my swap. even got the f3 plug on the first try!

once i find out where these wires go how should i go about fixing this problem?







these are for an S2 RB25. they are maybe 6 inches after the firewall grommet.

thank you very much for any help. my dream car is almost done!

Modified by xDRFTurR1D3x at 11:28 PM 3/21/2009
Modified by xDRFTurR1D3x at 9:08 AM 3/22/2009

[onepuff]

You might want to give a little more info like what car, engine, etc. Where are these wires coming from? ECU or chassis harness?

[d356bud]

If I had to guess I would say that was from an RB25 and it looks like those wires are the part of the harness that goes to the driver side of the engine(on a left hand drive). Most of the wires are useless because they go to some large chassis plug. I believe that the sky blue and the brown are for the boost solenoid, if I remember correctly. I know the wires with the shielding are very very important because one is for the o2 sensor and the other is for the MAF, assuming that this is the 25 and that it's the part of the wiring harness I think it is.

[xDRFTurR1D3x]

damn im sorry guys. i was way exhausted after spending 14 hours at the shop last night. fixed in post