Nope. Its just something I want to do. I like the look of cars with fog lights. I like the extra illumination on these dark, sparse Wyoming roads.SHIFT_2.5S wrote:Do you really need these foglights? I mean, from a practical standpoint...
FOOD?? Yeah, I like a lot of food in the mornings too. Especially a 3 egg omelette with extra bacon and tons of cheese! And don't forget the side of hotcakes with haupia syrup! YUMMY!!SHIFT_2.5S wrote:Speaking of fog, we've had a lot of food in the mornings and evenings here in LA.
Yes very easy bro! All I need to see are the picsgeneric808 wrote:
D-Roll, was the directions and pics easy enough to follow? I was looking at the post again, and thought that I didn't take enough pics along the way. It was a rush job because of the rain, but I may go back in next weekend to clean up my wiring and drill the ballast brackets into my frame just to have it secured. Just wondering if I needed to take any more pics beside the passenger mounting point? Of course, weather permitting that is.
I was really hungry when I was typing and was just about to go make dinner...generic808 wrote:
FOOD?? Yeah, I like a lot of food in the mornings too. Especially a 3 egg omelette with extra bacon and tons of cheese! And don't forget the side of hotcakes with haupia syrup! YUMMY!!
I can't imagine Nissan not having the harness in there. It doesn't make sense not to do that. Keep looking. I installed OEM fog lights on both my 02 Pathfinder and my 06 Altima 2.5. I did it mostly for looks by the way. Both vehicles were pre-wired for fogs. It was a dead easy job. If they did it back in 2002, then surely they do it now.mikemart wrote:So Friday I plan on looking one more time. If there is no harness, I will contact my service department and find out how much it would cost to get a wire/harness job done. I don't feel like doing the electrical....I'll let them do that; then I'll install the fog lights myself.
That's what I keep thinking. I found them in mine, which is a 3.5 though. But, it doesn't make any logical sense not to have them pre-wired. What if someone wanted to upgrade their 2.5 with fogs? Is Nissan going to have their techs wire that many cars just to install fogs? Hmm...Buzzman wrote:I can't imagine Nissan not having the harness in there. It doesn't make sense not to do that. Keep looking. I installed OEM fog lights on both my 02 Pathfinder and my 06 Altima 2.5. I did it mostly for looks by the way. Both vehicles were pre-wired for fogs. It was a dead easy job. If they did it back in 2002, then surely they do it now.
Even more so that doesn't make sense! Why would they wire only one side?! It's there, just tucked way behind the wheel well. The passenger side is tied up against the inner part of the body behind the bumper. At least in mine it is.prlwhitecoupe wrote:http://www.courtesyparts.com/b....html
Just confirmed it, the 2.5 has only one harness on one side....exactly where I found mine....goodluck with your install! BTW you're welcome for finding it, lol even though I stumbled upon it.
The pics you posted for the driver side, is that shot taken from the wheel well?i.e., were you pulling the well lining back and that is what you could see?generic808 wrote:
It's there, just tucked way behind the wheel well. The passenger side is tied up against the inner part of the body behind the bumper. At least in mine it is.
Does anybody know what this is? I say its the temperature sensor, but I could be wrong.prlwhitecoupe wrote:
Hey guys, sorry for the re-post, but I found a wiring harness on the driver's side of the car. It has to be for the foglights, but its only one side of the car....it's clipped to the underside of the lower front bumper....whats up with that? Does Nissan use this method to plug both foglights into the one harness? Shouldn't there be a harness on both sides?...
Ok Here is how it goes...I called Nissan headquarters and they said tht all 3.5 have them available (sedan and Coupe) and the 2.5 (Sedan and Coupe) DO NOT HAVE THEM PREWIRED...srry 2.5ersgeneric808 wrote:I wonder if there is a difference between the 2.5 and 3.5. I have the 3.5 and as you can see above, it's there and doing well. From the inside of the well, you have to kind of reach around to the front end of the bumper. It is tied up against the inside of the body. But who knows, maybe the 2.5 doesn't have it. That really doesn't make sense though
If you look at the pic above, did you check in that area in relation to the fog cut-outs? The harness sits about the same level as the fogs, but tied onto the inside.
