vlsd?

[scherger_16]

will a vlsd from a r32 skyline fit into my 1990 240sx with s13 black top sr20det with out abs?

[EfiniRX7]

If you cant get one for much, much under 600 just buy a used kaaz 2 way. I know I did not answer your question but, a kaaz is better than any factory unit.

[scherger_16]

well ill be getting this one from a skyline for about $100. need to know if it bolts up before i buy it.

[White Comet]

from what i understand yes it will. you might need the axles, but i'm not positive. I do know people that are using skyline vlsds in s13s though. i woudl reshim the vlsd before it goes in if i was you

[scherger_16]

i was just reading up on reshiming you can do this on ony vlsd.

[White Comet]

yep

[DALAZ_68]

mine bolted right in...was already the 6 bolt outputs so my stock axels were fine GL

[scherger_16]

ok i got the diff and the axles in the skyline diff are like a star shaped 6 bolt i think and the one in my 240 is a triangle shape with 2 bolts at each point of the triangle. what do i do now

[White Comet]

you need the skyline axles

[2ndnissan]

kinda related question...Were all the j-30's vlsd? I was just junkyarding today and found one with the six bolt axles. Yard wants $175 for everything...axles,pumpkin,wheels,brakes. I know a j-30 one will fit an s-13 .The yard doesn't have the key for it so the usual test for wheel spin won't work ...

[scherger_16]

so the skyline axles will bolt up to my car then and can you take the axle shafts from my 240 and put them into the skyline vlsd once i take the axle shaft out of the skyline diff