Viper 791xv - Starter Cranks by itself as soon as power connected

[onosqv]

Hey guys, First off, my alarm system was working fine until I decided to mess with it . I was attempting to find out where to hook up the 2nd ignition and was messing around w/ wires on the relay satellite unit. Then the starter tried to engage by itself (w/o me activating it).

I disconnected the wire that was causing it. After hours of troubleshooting, I have "isolated the problem."

Bascially I completely disconnected the alarm. I only have the relay satellite connected. The ignition is not connected, etc, only the green wire from the starter key side and purple wire engine side. When power is supplied to the red wire next to the purple wire, the starter starts going on and on.

Did I screw up the relay? I can't find anywhere that sells that unit by itself from recent searching.

Help please, Thanks