*video* what would cause this afr problem? please help

[droptop rb]

video shows im getting maf signal voltage back to the ecu and my afr is lean and inconsistant. new o2 and tps both test good. timed the best i could with rough idle for now, pressure tested for boost leak cant find any. tried two ecus and three mafs. (other two mafs show .33 volts at idle) checked plugs,


its an rb25 s1 all stock besides fmic and exhaust

http://youtu.be/uwyaJ4HHjgo

[Darius]

Is the car running abnormally other than the AFR being displayed on the innovate wideband? Have you set up the voltage/AFR correlation with the Innovate software?

[robbie2883]

did you do a free air calibration for the wideband?