video: RS*R exmag on sr20det (short)

[2forty]

sup guys. heres my exmag on my sr20. with megan manifold, greddy dump, megan downpipe, testpipe. you can pretty much only hear 3rd gear. louder than my n1 evo @_@

http://media.putfile.com/MOV0652687

[sunnys14]

well... all exhausts are loud at WOT.

[2forty]

louder than an n1. its for comparison ******

[sunnys14]

n1 has less flow than an exmag due to the extra mid resonator that has chambers that makes the exhaust gases breakdance

[codyace]

Make a LONGER video please...you can barely hear it anyway!

[Onizuka]

Only way to convey loudness comparisons over the internet: decible meter readings.

I have pretty much the same setup (my test pipe is resonated) and I think its quiet as can be, at least compared to all the other sr powered cars running cannister exausts that I have heard.

[Neil]

well... all exhausts are loud at WOT.

not entirely true, look for my vid of my BRM with an sr.

The exmag sounds more bratty than i thought it would... does it have a resonator or is it straight to the rear muffler?

also is that an hks ssq blow off valve?

[srdrps13]

i dont think it was an hks ssqv... mines sounds much different.. sounds like a bus on crack haha

[sunnys14]

its a hks ssqv with a megan turbo manifold, greddy turbo extension, 3" downpipe and test pipe, and RSR ex mag.

[deCksy]

it sounds good! make another one at idle and low rpms

[Blown240sx]

My car doesnt sound that raspy. Mine has a deep turbine sound when I get on it. Ill have to make a Vid.

[S14Life]

pleeeeeease do. im in the market for an rs*r exmag.

sounds awesome

[2forty]

there is no resonator. straight shot to the muffler. i know that after a turbo manifold + greddy elbow exhaust pitches get higher. ive experienced it twice on 2 different cars. oh and yes it is an hks ssqv. ill c if i can get a rolling camera car to help wit the sound

[sunnys14]

oohhhh were gonna hafta race then
Modified by sunnys14 at 11:16 AM 2/28/2006

[S14Life]

get a vid blown240, i want to see what you're talking about. are you running the exmag? you said you have a 3 1/4" Jasma Spec R33 Full Cat-Back in your sig..