Venus Prices? (i searched)

Post by **Sliding_S14** » Sun Sep 28, 2003 7:47 pm

i searched and i went to venus's site, even contacted them and havent gotten a message back. there site dosent have prices (least that i can find) and im lookin to see how much a 94-97 r33 rb25det front clip is (with out shipping). if you can help or point me in the right direction id appreciate it.

Post by **Nathan** » Sun Sep 28, 2003 7:47 pm

Call...it's the best way of getting ahold of them and you might have trouble even then. Their phone system doesn't always work so well so just call over and over until someone answers...they should be there for cetain any time between like 10 and 3.

Post by **Sliding_S14** » Sun Sep 28, 2003 7:47 pm

thanks will do, but have class from those times during the week not sure how long it will be to actually drop them a line.

Post by **Nathan** » Sun Sep 28, 2003 7:47 pm

I understand class...but they are BAD at returning e-mail just because of the volume of e-mails they get. They might stay later, probably until 5...I just said 3 to be safe

I have no idea what time they open though.

Post by **PROJECTRB240SX** » Sun Sep 28, 2003 7:47 pm

UMM HE IS IN NOR CAL HE COULD PROBABLY DRIVE TO SACRAMENTO AND PICK IT UP. MY SHIPPING WAS ONLY $300, SHIPPING TO THE WESTERN STATES IS DONE BY G&I TRUCKING WHICH IS A GREAT CARRIER.

Post by **spec-v5150** » Sun Sep 28, 2003 7:47 pm

GI was good for me too. It wasnt until i got up here did it start sucking. I paid 636 total. THEN had to pay anotehr 75 sinc4e no one in this whole damn state had a liftgate equipped trcuk. AFTER I paid teh extra money for lift gate service. LOL damn farmers. And yeah dont email tjose fools. i emailed them in May to order my RB20....still havent heard back. But I called the same ay and ordered so its cool

Post by **Project240** » Sun Sep 28, 2003 7:47 pm

I actually sent them an email several weeks ago asking about R33 RB25 clips. Said they're only selling complete motor sets, and they're $2700. That was several weeks ago though, so they may have whole front clips for sale by now.

Post by **Sliding_S14** » Sun Sep 28, 2003 7:47 pm

in between class's at the moment.i just was curiouse on a price quote it said they 94-97 clips/motor sets in, but for 98+ all they had was motor sets instock (on there website). im no where near ready for swap just finding price quotes to see how long it should be. still gotta find a legal way to get around smog. still be a few maybe several years before i am RB powerd, dosent help smog regulations getting stricture in cali as time goes on.

Post by **Joe** » Sun Sep 28, 2003 7:47 pm

the longer you wait the more the price is gonna go upback in feb. before the swap got popular the clips were 1500, last i heard they were around 2800 fron venus. this was a month/2 ago. if they are selling motorsets for 2700 expect at LEAST 3000 for a clip

so good luck.

Post by **Bluefire** » Sun Sep 28, 2003 7:47 pm

Dammit I had my name on their waitlist from a month a go for an RB25 Clip, but no reply from them yet. Hmm better give them a call... Next clip is mine!!!

-Bluefire

Post by **Jimmyg41** » Sun Sep 28, 2003 7:47 pm

Kamin wrote:the longer you wait the more the price is gonna go upback in feb. before the swap got popular the clips were 1500, last i heard they were around 2800 fron venus. this was a month/2 ago. if they are selling motorsets for 2700 expect at LEAST 3000 for a clip

so good luck.

I checked back around this time (in feb) for the same thing and I never recal a clip ever being that cheap. That's cheap even for the motorset.

Post by **Joe** » Sun Sep 28, 2003 7:47 pm

well i know 2 people personally who got their clips for $1500 and one for 1800$ in feb of 03.

no special deals that im aware of.

Post by **Altiman94** » Sun Sep 28, 2003 7:47 pm

RB25 clip for 1800$?

Post by **PROJECTRB240SX** » Sun Sep 28, 2003 7:47 pm

RB25 USED TO BE LIKE $1200 WHEN IT WASN'T POPULAR AND THE RB20'S WERE LIKE $600-750.

Post by **JeffTN** » Sun Sep 28, 2003 7:47 pm

What does a "motor set" consist of?

Or perhaps I should ask what does it not consist of?

Post by **PROJECTRB240SX** » Sun Sep 28, 2003 7:47 pm

MOTOR, transmission, HARNESS AND ECU.

Post by **S13 Power** » Sun Sep 28, 2003 7:47 pm

So whats base shipping cost from venus. Im thinking of picking up an SR20DE for my sentra SE-R. they got it for 250 which is a good price but if shipping is too much it might not work so well than just picking it up from a local place. also are all there engines JDM?

Post by **PROJECTRB240SX** » Sun Sep 28, 2003 7:47 pm

SHIPPING TO ME IN AZ FOR AN ENTIRE RB20 CLIP WAS $360.

Post by **S13 Power** » Sun Sep 28, 2003 7:47 pm

wow thats actually preaty good. Do they still honor the website prices if you find your own shipping. or pick it up yourself

Post by **PROJECTRB240SX** » Sun Sep 28, 2003 7:47 pm

YEAH, SHIPPING HAS NOTHING TO DO WITH THE PRICE. AND AS FAR AS I KNOW THERE IS NO DISCLAIMER SAYING OTHERWISE.

Post by **dareo** » Sun Sep 28, 2003 7:47 pm

you got a clip shipped for 360 dollars? Thats freaking awesome! Did you get that to a business with a dock or something? I'm up in Utah and i can't see it being much further than AZ.

Post by **Joe** » Sun Sep 28, 2003 7:47 pm

**** i paid 300 to my door from venus for shipping

Venus Prices? (i searched)

Venus Prices? (i searched)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums