Vehicle Impact Sensor Install problem on 2011 G37

[shottel]

I have a 2011 G37 Coupe and i recently purchased the 999M2-VU003 Vehicle Alarm Impact Sensor to add in myself. Instructions that came with the kit are dated 2008 and I was able to pull some 2010 instructions but of course neither of those instructions align with the wire colors in my car. I'm supposed to tap into 3 wires:

M121: cavity 50 is orange on my car, 2008 instructions think orange, 2010 instructions think green.
M119: red wire appears to be in cavity 11 but of course none of the other wires called out in either instructions match.
M123: the 2010 instructions say 124 = lt. green 123 is white and 121 is green....and to tap into the white at 123. My car: 124 = red 123 = purple 121 is light blue. The 2008 instructions say to tap into 122 so I'm not comfortable taping into wires by position alone.

I can't find any 2011 instructions online and am stuck. Does anyone have any instructions or proven experience to pass on for this application? Many thanks!

[Q451990]

to NICO!

I suspect you'll get a better response in the G forum, so I'm moving your post there...

Good luck!

Heath

[telcoman]

I have a 2011 G37 Coupe and i recently purchased the 999M2-VU003 Vehicle Alarm Impact Sensor to add in myself. Instructions that came with the kit are dated 2008 and I was able to pull some 2010 instructions but of course neither of those instructions align with the wire colors in my car. I'm supposed to tap into 3 wires:

M121: cavity 50 is orange on my car, 2008 instructions think orange, 2010 instructions think green.
M119: red wire appears to be in cavity 11 but of course none of the other wires called out in either instructions match.
M123: the 2010 instructions say 124 = lt. green 123 is white and 121 is green....and to tap into the white at 123. My car: 124 = red 123 = purple 121 is light blue. The 2008 instructions say to tap into 122 so I'm not comfortable taping into wires by position alone.

I can't find any 2011 instructions online and am stuck. Does anyone have any instructions or proven experience to pass on for this application? Many thanks!

Welcome to NICO

1- My advise is Don't attempt to do this as you may very well void your warranty.

2- You would need to have the latest FSM for your vehicle that would include the wiring diagram. (see item 1)

3- You could inquire with the service manager at the dealer where you purchased your vehicle or call Infiniti Customer Service and ask about vehicle impact sensors.

4-Just be careful where you park and you probably won't need it anyway.

Good luck with your new vehicle

Telcoman