Vacuum Lines CA18det 1989 240sx HELP! PLEASE!

[shroomguy]

I did the CA18det engine and transmission swap in my 1989 240 coupe in October and It runs ok..But, I do not have the vacuum diagram for the engine and the diagrams i got from other peoples sites all have BOV's which i do not have. The car drives fast but b/c of the vacuum lines being hooked up wrong I have no brakes!! the car stops as if the car was turned off. Also the car backfires from the intake when not warmed up enough. I work for Firestone and the technicians at my shop said that it is the vacuum lines being hooked up wrong but they do not know how they should be hooked up either. I was hoping someone with this car and engine could help me out. I have been trying to get this car back on the road for a long time. Please help me out.

[shroomguy]

this is what my set-up is right now in my car. (THE RED LINES) I need to know what to do with the other lines and if it is supposed to run ok the way i have it set up?


Modified by shroomguy at 7:54 PM 1/8/2007

[dj2kat]

I AM DOING THE CA18DET SWAP IN MY 92 240 SX DO YOU HAVE ANY INFO ON HOW TO DO THE WIRING FROM THE ECU TO THE PLUG ABOVE INTO THE DASH DOES NOT MATCH.