vacuum block fixed my vacuum leak

[Craving4Boost]

http://m24x.zeroforum.com/zerothread?id=1420

i dont know if this has been discussed before but i was SOO TIIREEDD of cutting up the FPR line and didnt know if it was leaking or not. i was too lazy to do the vacuum leak test too so i went ahead and bought this. it works great!! it looks nice...makes your vacuum lines much NEATER...this thing T's off the brake booster line so you have a good vacuum source...

for you creative people..like WD....im sure u can build something like this easier...

just a heads up! worked great for me....hope this helps in any way

[ultimatuc]

right on. I'm actually having something like this made. It will basically be a new egr block off plate with 3 vacuum ports. (fpr, bov, and map)

this is a must for people running map sensors. no more silicon.

[Craving4Boost]

yeah after i got it i knew i could've built something like this but oh well sometimes you get lazy

[ultimatuc]

http://cgi.ebay.com/ebaymotors...ZWDVW

[ultimatuc]

way pimp. thanks for the heads up, cravingforboost.

[Craving4Boost]

no problem...i know i already used 5 out of 6 vacuum routes...it would have been a real ugly using 5 T's off the FPR...make sure you T that vacuum block off the brake booster line..nice and thick vacuum source

[ultimatuc]

I'm actually going to run it in-line with the vacuum line to the booster.

[Craving4Boost]

you mean have a vacuum fitting on each side of the block and stick it in? that would also do