VAC LINE HELPP

Discuss the RB20, RB25 and RB26 series engines.
RBfolife
Posts: 47
Joined: Tue Mar 30, 2010 3:00 am
Car: 1995 240sx

Post

I have a series 2 rb25det in my s14 and these lines run to my charcoal can and sinch i'm not usin it, i plugged them up. The one under the itm (2nd pic) wen plugged, my car idles real low and wants to die. When i leave it open it runs better. :wtf2:
Also i'm runnin open turbo elbow right now till my exhaust gets here could that be y?
Image
Image


User avatar
jey_253
Posts: 158
Joined: Tue Oct 09, 2007 10:19 am
Car: 1990 S13 Silvia Conversion Rb25det

Post

Plug it and adjust your idle via the iacv screw. Been a while so correct me if im wrong

RBfolife
Posts: 47
Joined: Tue Mar 30, 2010 3:00 am
Car: 1995 240sx

Post

k i'll try that

Darius
Posts: 4820
Joined: Sun Mar 02, 2003 9:48 am
Car: RB25DET S14 - 665 WHP (SOLD)
Location: Chicagoland

Post

And make sure your ignition timing is set correctly. 15* BTDC at operating temp. That will affect idle speed and overall driveability/power.

User avatar
R32ONP
Posts: 93
Joined: Sun Jun 27, 2010 9:57 pm
Car: R32 Skyline GTS-T
RB20DET
Location: New Zealand

Post

yeap u defonalty wana plug them up as the bottom one is straight vacuum leak..it will wana rev higher with it off as itl be running crazi rich lol...plug them up and set the timing and tps and iacv to set the idle speed etc


Return to “RB20DET / RB25DET / RB26DETT Forum”