Using Dsm injectors on ka?

[vadem]

I have some stock injectors of a 90 talon 450cc top feed injectors with the resistor pack. Now im not sure what impedence they are. But ive heard that you can use dsm resistor pack to change impedence's. Does anyone know If they will fit, or work with a top feed rail. Thanks

[3rD GeAr]

the injectors should be 440s and they are low impedance injectors. if u are asking about using them with the top feed fuel rail on the sohc ka they will work but u will have to have the fuel rail bored out for the injectors. stock injectors are high impedance so you will need the resistors... these will not work with dohc kagood luckNiko

[andrave]

why wouldn't they work with a ka24DE?get a top feed fuel rail...what style injectors do the dsm's take? msd?

[ryans13]

ka and sr top feed fuel rails arent hard to find, and the prices comin down so i too would like to know as this gives many more injector options

[WDRacing]

I heard the 4.6 Mustang rails work. Although I've never seen it personally. I'm probably gonna pick one up just to see.

WD

[andrave]

I've seen it, it works... one injector is off a tiny bit but it looks like it doesn't leak. and you can get em for cheap. the later mustangs look to have switched to a different fuel rail though, I haven't seen that one tried yet though I'm guessing it would be the same... but anyway would DSM injectors fit in the 4.6 rail? jesus this is getting sweet, eventually we can visit a junkyard and for like 100 bucks have a turbo kit.

[k6kicker]

heck if we get the whole twin cam head on single cam block swap all sorted out then the bigger injectors like this we could have some serious ka power for pennies

[j-z]

what year 4.6 work? **** you cant go wrong with dsm injectors. i ran the 450s in my lude and for $50 you cant go wrong.

[SloS13]

Finding a way to fit DSM injectors would be TOTALLY AWESOME DUDE. fo realz. $60 for a set of 450's. If you wanna be on the safe side, another $50 for cleaning.

[bigE]

I am going to see what I might be able to come up with, we have a set of 550cc's from a Cyclone 4g63t sitting in our shop.

Eric

[Z1500]

That's what I'm running on my ka24e, they are 450cc. No boring or anything required. Just the resistor pack and the injector clips are a little different.

Kevin

[3rD GeAr]

Z1500- u r using dsm 440cc inj. with the stock sohc ka fuel rail without anything done to the rail.

the injector clip is slightly different (nothing a razor blade cant fix) and u will need the resistor packs. dsms do not use msd style injectors. i do not know if the top feed fuel rail for a sohc ka would fit the dohc intake manifold (without custom mounts and the injector clips) and if the 4.6 mustang fuel rail would fit dsm injectors. good luck everyone finding out the cheapest alternative.-Niko

[SloS13]

anybody got a list of years of mustangs that this trick will work with?

Also, what do you do about FPR? use the 'stang one?

[Z1500]

Z1500- u r using dsm 440cc inj. with the stock sohc ka fuel rail without anything done to the rail.

Yep. And I am using the DSM resistor pack with them.

Kevin

[andrave]

yeah there are plenty of aftermarket mustang fuel rails

[vadem]

So size wise they fit. The fuel rail is no big deal. Only thing im not sure of is, what is the resistor pack for, woukld I need it for the ka. So basicly I can grab a sohc rail and itll work? My car is an s14 so its a de

[j-z]

how about z1500 do a nice write up on this. like how you wired them and parts needed. ehhh?

[andrave]

whoa tiger (vadem) I don't think its been verified that a sohc fuel rail has the proper spacing for a DE.the mustang 4.6 fuel rail does though. careful now. and you can prolly cank the resistor pack from any eclipse.

[SloS13]

Make DSM injectors work on a DE then report back to me...STAT.

j/k I wish i had a bunch of engines to figure out what works with what. That'd be neato!!!!!!!!!!!!!!!!!!!!

[andrave]

anyone live in a junkyard?

[SloS13]

^^you obviously have never seen my room

[andrave]

my mom said my room looks like a junkyard, and my friend said "yeah, but its a COOL junkyard."I don't live at home anymore so I just use my tiny old bedroom as a warehouse for all the parts that are going on my car once it gets warm. its filled to the brim.