Underdrive pulley question

A forum for the legendary Nissan Pathfinder and Infiniti QX4.
Zymol75
Posts: 38
Joined: Fri Oct 04, 2013 5:12 pm
Car: R50 Pathfinder Q swapped

Post

Anyone know if the crank sprocket from a 3.0 (older Maxima) will swap with the one on the VG33E?


Zymol75
Posts: 38
Joined: Fri Oct 04, 2013 5:12 pm
Car: R50 Pathfinder Q swapped

Post

okay, so anyway here's what happened.

My a/c compressor idler pulley was screaming at me, and the only one avail was about 20 miles away and the wife wasn't interested in my not being embarrassed about it, so I was made to wait for the coming week to do anything about it. well the noise had to go and It's getting cooler so I could do without a/c for a few days till the part could be had. I took the a/c belt off and the faulty pulley and all was quiet. ahh. wind in my face. ok. so bad idea! Apparently my crank sprocket (aka harmonic balancer ) had given up long ago and was only being held together on the shaft by "all 3" belts. Well now the big front a/c belt was gone and so when i took off from my neighborhood this morning the whole outer rim of the balancer/pulley assy went out like a discus. And it invited other parts to come with it and yeah well they all had a party as they ran outta my life and into the weeds never to be seen again.

Image

Image

So lucky for me NAPA had one on the shelf and 140 bucks later a nice new one is going in!!

Image

Image

Zymol75
Posts: 38
Joined: Fri Oct 04, 2013 5:12 pm
Car: R50 Pathfinder Q swapped

Post

This is what I would like to ultimately get...

Image


Return to “Nissan Pathfinder Forum / Infiniti QX4 Forum”