Ultimate E-manage + S13 Black top = help

[kylaris]

Everything seems to be fine except it won't start up with ignition wires wired to e-manage. It would only start up, if I wire the ignition back to stock then I can check the air flow, throttle, and injector using real time data logging.

this is how I wired my ignition up.ECU coil#1(#1) Ignition#1--->Blue/white & Blue/Black E-manage Ch1ECU coil#2(#2) Ignition#2--->Purple/white Ignition & Purple/Black E-manage Ch4ECU coil#3(#8) Ignition#3--->Orange/white & Orange/Black E-manage Ch2ECU coil#4(#9) Ignition#4--->Yellow/white & Yellow/Black E-manage Ch3Jumper7 = 1-2Jumper8 = 1-2

I've called Greddy but the tech i've spoken to didn't seem to know much. Only thing he tole me to do is change the jumper 7 setting to 2-3. That didn't work as well.

Does anyone have the ultimate e-manage in sr20det? Help!!

[Blown240sx]

Umm did the thing come with a setup manual? I know a SAFC II is a different beast but it has a intial setup you have to do to make the car run right.

Also check your ECU Pin layout and make sure you have the right connections and check your grounds and al connections on the UEM.

[kylaris]

It was wired backward. I had the input wired to output and output wired to input. Now it's working fine.